Natural Gas Torpedo Heater - 150,000 BTU, HeatStar HS170NG
- Torpedo heater has a heavy-duty design built for the job site.
- This Thermostatically controlled Heatstar 150,000 BTU Forced Air Natural Gas Heater comes with a regulator and all the safety you would expect of a Heatstar product.
- Equipped with factory installed high limit switch and continuous solid state ignition, you can feel comfortable using this heater on any job site with natural gas available. Just plug the heater into a 110v outlet, then hook up the natural gas to the supplied regulator and you are ready to take the chill out of any job.
- 150,000 BTU per hour
- For use with natural gas
- Heats up to 4,000 sq.ft
- Rugged and durable steel construction
- Economical, efficient and clean burning
- Heavy duty high output fan
- Regulator included
- Hose not included
More v
- Weight: 21.9 lb
- Fuel Type: Natural Gas
- Minimum LP Tank Size: N/A
- Minimum NG Line Size: 3/8in
- Electrical Rating: 115V / 3 AMP
- Air Volume (CFM): 450
- Gas Inlet Connection: 3/8in
- Gas Inlet Pressure: Min 1/2 PSI (To Regulator)
- Gas Inlet Pressure: Max4in (Regulator out)
- Clearance to Combustibles: Horizontal Outlet 6ft; Sides 2ft; Top 3ft
- Duct Length Max: Not Applicable
- Duct Diameter: Not Applicable
- Multiple Ducting Optional: Not Applicable
- Wheel Type: Not Applicable
- Thermostat Optional: Not Applicable
- Item Length (in): 11.75
- Item Width (in): 26.5
- Item Height (in): 16.25
- Item Weight (lb): 27.11
- Warranty: 1 Year Limited
- Model: HS170NG
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.