Steelmax Annular Cutters - ALL SIZES, ALL CUTTING STYLES
- Steelmax high speed annular cutters utilize an M2Al (aluminum additive) formulation which increases cutter life due to better heat propagation characteristics and its less brittle character compared to other M2 formulations, such as those using a cobalt additive.
- Pilot Pins included with 1”, 2” and 4” DOC cutters. Pilot Pin for 6” DOC cutters must be purchased separately
- High speed annular cutters are most cost effective for mild steel applications and holes up to 2-3/8" in diameter in material up to 2" thick and can be re-sharpened to extend cutter life.
- Tungsten Carbide high speed cutters also known as TCT cutters are made with the highest quality carbide available and are extremely well suited to work on harder materials and higher speed applications. TCT cutters are most cost effective for larger holes (over 1-1/2" in diameter) and in thicker materials (2" and over)
- Annular cutters have many advantages over traditional twist drills
- Eliminates costly and time consuming step-drilling
- Significantly less drilling time – 3-4 times faster than twist drills
- Longer tool life – 5-10 times as many holes as a comparable twist drill bit
- More accurate and higher quality holes – burr-free with no clean up
- Easily drill on curved surfaces such as pipe or tubing
- Create overlapping holes
- Lower machine and horsepower requirements when compared to twist drills
More v
- Pilot Pins included with 1”, 2” and 4” DOC cutters. Pilot Pin for 6” DOC cutters must be purchased separately
- Carbide 1" Depth cutters have a 1-3/8" length/depth of cut
- Carbide cutters 2-7/16" in diameter and larger have 1-1/4" Weldon Shanks and require an appropriate arbor.
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.
Ratings & Reviews
1 review
cutters - worth it!
by Martin
these cutters are perfect. cuts through steel with ease!