Rebar Tie Gun Twintier , #9 x #10 Rebar, Max RB611T
- Rebar tie gun The RB611T’s jaw capacity enables the tool tie up to a #9 x #10* rebar providing an efficient solution for large bar job sites.*Varies by rebar manufacturer.
- The TwinTier’s Dual Wire Feeding Mechanism doubles the tying speed, completing a tie in approximately ½ second, increasing productivity.
- Compared to conventional rebar tying solutions the TwinTier’s Wire Pull Back Mechanism dispenses the precise amount of wire needed to form a tie, reducing wire usage and cutting production cost.
- The TwinTier’s “Wire Bending Mechanism” (Patent Pending) produces a shorter tie height which requires less concrete to cover a wire tie.
- An enclosed magazine protects tie wire and internal mechanisms from debris, providing greater durability.
The Twintier’s Quick Load Magazine allows operators to quickly load tie wire.
More v
- WEIGHT 5.7 lbs
- DIMENSIONS 11-7/8"(H) x 4-7/8"(W) x 13-7/8"(L)
- MINIMUM TIES PER COIL 115
- MAXIMUM TIES PER COIL 205
- APPLICABLE WIRE PRODUCT/GA TW1061T / 19Ga, TW1061T-PC / 19Ga, TW1061T-EG / 19Ga, TW1061T-S / 19Ga
- APPLICABLE REBAR SIZE #5 x #5 - #9 x #10* *Varies by rebar manufacturer
- TIES PER CHARGE 5000
- TIE SPEED Approx. 1/2 sec
- BATTERY CHARGE TIME Approx. 80 minutes full charge (approx. 60 minutes 80%)
- BATTERY JPL91450A
- CHARGER JC925A
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.