Retaining Rings, 3/4" Drive, 1 5/8" Groove Dia - Proto RR07526
- Cracked sockets and or worn drive tools cause each other to turn excessively in relation to each other
- Designed with a resin crush gauge to help identify when to replace worn sockets
- Drive tool and socket should line up when in use and should not pinch the crush gauge
- One piece construction, no loose parts
- Pin is made of resin which allows the material to compress without breaking
- Retaining rings are used to help secure sockets onto drive tools
- The resin crush gauge on the pin helps indicate when a socket is excessively worn and should be replaced
- The rotational forces are between the drive tool and the socket
- They are not intended to bear any load
- This action pinches the small fin or the crush gauge on these retaining rings. If the crush gauge is pinched, it is an indication that the socket and or the drive tool need to be replaced
More v
- Drive Size [Nom]: 3/4 in
- Height [Nom]: 0.187 in
- Groove Diam: 1 5/8 in
- Overall Length [Nom]: 1.812 in
- Material: Resin Pin
- Width [Nom]: 1.812 in
- Type: O-Ring
- Wt.: 0.01 lb
- Country of Origin: US
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.