Palmgren 9680159 13" Gear Head Milling Machine, Variable Speed, 5/8hp, 240v, 1ph
- Rigid box column with hardened and ground hand scraped dovetail ways provide accurate head positioning with minimum deflection and vibration
- All gear drive transmission with 2 step gear box
- The milling head can be tilted right or left up to 90 degrees
- Precision machine tool spindle equipped with tapper roller bearings and a spindle concentricity of 0.0005 at the spindle nose
- Cross slide table is precision ground with t-slots, adjustable limit stops, scale and two metal adjusting hand wheels
- Interlocking spindle safety guard
- Draw bar
- Safety electrical system with emergency stop button and 24 volts at all the switches
- Two Stage Gearing Motor
- Swing Away Safety Shield with Micro Switch
- Depth stop Interlocking spindle safety guard Draw bar
More v
- Part Number: 9680159
- Cross Travel: 6-3/8"
- Drilling Capacity in Steel (max.): 5/8"
- End Milling Capacity: 3/4"
- Face Milling Capacity: 2-1/2"
- Head: Gear Driven
- Longitudinal Travel: 8-21/32"
- Motor: 5/8HP - 115V -1PH - 10Amp - 60Hz
- Operation: Manual
- Optional Accessories: Item # 9670107 Heavy duty floor stand
- Speed Range: 100 to 3000
- Spindle: 2MT with 3/8"-16 Draw Bar
- Spindle Taper: 2MT
- Spindle to Table: 8-1/4"
- Spindle Travel: 2"
- Swing: 13-1/2"
- Table Work Surface: 15-3/4" x 4-3/4"
- T-Slots: 3/8"
- Width: 18.00
- Warranty: 3 Year
- Country of Origin: CHINA
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.