Metabo Drill Hammer - SBEV 1000-2
- Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for working at customized speeds to suit the application material and speeds that remain almost constant, even under load
- Thumbwheel for speed preselection
- Robust die cast aluminum gear housing for optimum heat dissipation and durability
- Rotating carbon brush bridge for maximum power even when rotating counter-clockwise, e.g. when removing jammed screws
- Metabo Long-life motor with dust protection for long service life
- Metabo S-automatic torque limiting clutch: mechanical decoupling of the drive for safe working should the tool stop unexpectedly.
- Forward and reverse rotation
- Spindle with hexagonal recess for screwdriver bits for working without chuck
- Cable-protecting ball joint for the best freedom of motion when working
- Includes: Geared chuck, Chuck key, rubber-coated handle, Drilling depth guide, Plastic carrying case
More v
- Parameters
- Rated input power: 1010 W
- Amps: 9 AMPS
- Output power: 560 W
- Maximum torque: 354 / 124 in-lbs
- Max. capacity in masonry: 7/8''
- Max. capacity in concrete: 25/32''
- Max. capacity in steel: 5/8 / 3/8''
- Max. capacity in soft wood: 1 9/16 / 1''
- No-load speed: 0 - 1000 / 0 - 2800 RPM
- Revolutions at rated load: 1000 / 2800 RPM
- Maximum impact rate: 53200 BPM
- Gears: 2
- Chuck capacity: 1/16 - 1/2''
- Collar diameter: 1 11/16''
- Drill spindle with hexagonal recess: 1/4''
- Drill spindle thread: 1/2 '' - 20 UNF
- Weight (without power cable): 6 lbs
- Vibration
- Drilling in metal: 4.2 m/s2
- Uncertainty of measurement K: 1.5 m/s2
- Impact drilling concrete: 17 m/s2
- Uncertainty of measurement K: 1.5 m/s2
- Noise emission
- Sound pressure level: 103 dB(A)
- Sound power level (LwA): 114 dB(A)
- Uncertainty of measurement K: 3 dB(A)
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.