Lift Conveyors 42 Foot Portable Belt Lift Conveyor
- Light weight aluminum structure
- Telescopes to full length in just seconds
- Ideal for tight areas, lawns, walkways, etc. on tear-offs and re-roofing projects
- Reverses for off-loading
- 110 A.C. power or portable generator
- Bring the Portable Conveyor to your work site and load at your own schedule
- It transports on any small pick-up truck or flat bed.
- It takes less than 5 minutes to set up and it loads all common roofing materials.
- Material main structure: Aluminum
- Electric power enclosure: Nylon
- Belt rollers: Plastic
- Drive and support belts: Polyester webbing
- Belt speed: 90 feet per minute
- Motor: 1 hp.110 volt A.C. single phase
- Max Amp. draw: 13.5 Amp
- Transmission: Single worm. Aluminum housing
- Belt cleats: Aluminum
- Cleat height: 4” or 3”
- Cleat spacing: 6’ standard. (4’ or custom design available.)
- Belt span drive belts: 10 3/4 “ between the two drive belts
- Belt span support belts: 24” between the two support belts
- Wheels: Solid rubber with bearing
- Load capacity: 350 lb continuous load at 45degre incline
- Measurements: 26/35’ conveyor
- Weight: 230 lbs
- Height: 3 ft.
- Width: 3 ft.
- Transport length: 17 1/2 ft.
- Extended length: 26/35 ft.
- Warranty: One year
- Measurements: 42’ conveyor
- Weight: 290 lbs
- Height: 3 ft
- Width: 3 ft
- Transport length: 22 1/2 ft.
- Extended length: 42 ft.
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.