Jet 756121 Ph-24t, 24" Planishing Hammer
- Smooths beads and forms mild steel sheet metal up to 16 Gauge
- Smooths beads and forms aluminum and copper up to 1/8 in. thick
- Machine supplied with a pair of upper and anvil dies
- 3-Position airflow regulates speeds of pneumatic hammer
- Machine controlled with 110V AC foot control
- 2-Die Set Brackets
- Quick change of upper dies
- Retractable handle makes machine easy to move around the shop
- Wider base support to prevent movement of machine while in use
More v
JETs 24 Planishing Hammer has a quick change set up on the upper dies and a deep throat that works to the middle of most panels. The head with 3-speed regulator is capable of 4,400 4,800 / 3,200 3,500 / 1,800 2,000 blows-per minute (BPM). Easy to-reach, adjustable flow control valve allows the user to deliver the proper BPM needed for any job. Operates on standard shop air.
- Frame Tube Sizes (In.): 4 x 4
- Throat (In.): 24
- Head Opening (In.): 2-1/2
- Maximum Pressure (PSI): 90
- Air Consumption (CFM): 8.8
- 3-Speed Regulator (Hits Per Min.): 4,400 - 4,800 / 3,200 - 3,500 / 1,800 - 2,000
- Noise Level (DB): 93 - 105
- Overall Dimensions (L x W xH) (In.): 61 x 31 x 28
- Weight (Lbs.): 258
- Height: 61.0000
- Length: 33.5000
- Weight: 250.0000
- Width: 30.0000
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.