Jancy Mag Drill - 2" Capacity, 1-5/8" Dia, Magforce 6920
- Magnetic drill features an ultra compact 11' working height. Adjustable cutter guard with built in chip breaker
- Through spindle coolant system with removable tank . Flat, recessed 24 volt soft touch control panel
- Permanent quill system requires no adjustments. Stationary motor
- Light weight, only 27 pounds, Smart circuitry prevents motor from engaging on non-ferrous material
- Positive slug ejecting arbor system
More v
- Ultra compact design features allow the Magforce to be utilized in areas no drill has gone before. Measuring only 11 in height and weighing in at 27 pounds, The Magforce delivers more hole drilling power then machines twice its size. Unique features include powerful 1200 watt motor, new magnet design for superior holding strength, soft touch control panel with integrated smart circuitry to prevent motor start up on non-ferrous materials, and spindle coolant with positive slug ejection.
- Height: 12"
- Height (without coolant bottle): 11"
- Width: 6-1/2"
- Length: 11-1/2"
- Weight: 27lbs.
- Motor: 1.6 HP 1200W (single phase) 120V / 10.2 ~ 240V / 5.1A 395 RPM (no load)
- Arbor bore: 3/4"
- Drill point breakaway: 1096lbs. on 1" plate
- Magnet base dimensions: 4" x 6-1/2"
- Magnet dead lift: 1810lbs. On 1" plate
- Slugger cutter diameter (maximum): 1-5/8"
- Slugger depth of cut (maximum): 2"
- Total travel: 2 9/16"
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.