Imer 750 Mortar Mixer 7.5 HP 220V Electric 18 CU , MM750MBPE

Part# 1194645
$13,704.99
On Order. Call Now.
Ships by Truck
  • Hardened steel ensures minimal flexing on the paddles, gearbox drive with 13HP Honda (electric start) or 5 HP 220v single or 3 phase motors available. 7 gallon gas tank on the gas unit ensures all day operation. Improved breath-ability on the motor, minimal maintenance, forklift points front and side, lifting hooks, hinged grate with bag breaker and auto shut down, adjustable height complete with lifting jack, extra wide leg outriggers ensure that your biggest mortar pans will fit between the legs. Control the discharge with an easy to use lever. Connect a water supply to its plumbed water discharge hose. Torsion bar suspension and ball hitch adapter make this a breeze to tow.
  • The fastest mixers available today are the Mortarman vertical shaft machines from IMER U.S.A. The horizontal sweeping action, combined with the free spinning trident paddles, delivers fast and thorough mixing along with rapid and complete discharge. Available mixing torque is tremendous, pre-blending a full batch of dry material is no problem. The lower the slump, the stiffer the mud, the better our mixers perform!
  • There is not one zerk fitting to grease or bearing to pack in our entire line of vertical shaft mixers. The drive systems are fully enclosed in an oil bath. There are no daily maintenance procedures, service the mixer when the job's completed -- it's that easy!
  • Today's jobsite is a whirl of activities. This environment demands proactive safety measures to ensure government regulations are satisfied. IMER's contribution is the industry's first safety interlock system. Raise the production grate, and the motor stops.
  • HP 5 @ 220v or 3 phase
  • 13 Honda GX w/elec. start
  • Drum Capacity 27 CF
  • Drum Output 16 - 18 CF*
  • Output Mortar Type N 8 bag*
  • Output Concrete 4 bag (3/8" max)*
  • Output 80lb premix 20 bag*
  • RPM 35
  • DBA (operator) 68 (electric)
  • Platform Hardened steel base, 4 stabilizers/jack
  • Suspension Torsion Bar
  • Discharge Height Min - 17-1/2", Max – 29
  • Silo applications Yes
  • Ball Hitch Yes
  • Fenders Yes
  • L x W x H 90" x 62" x 63"
  • Weight 1700 lbs
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.

Ratings & Reviews

No reviews available

Be the first to Write a Review