Imer Tile Saw Combicut 250VA
- Rips=28 in , Diagnal Cut=N/A in, Depth of Cut=3-3/4 in; Includes separate stand and 1 blade
- Pivoting head allows for plunge cutting, door jamb cut outs, and gives 28 inches of cutting length (31" with plunge) yet weighing in at under 85lbs.
- Stainless steel cutting surface
- The moving parts on the cutting head are made up of wheels mounted onto waterproof ball bearings which allow free movement and precise cutting. The cutting unit, made from pressure die-cast aluminium, and the extruded aluminium sliding bar optimise its op
- The machine comes with a support with telescopic feet to which it is easily attached to the special connections on the water tray
- Plunging the blade from above improves cutting quality. In fact, the blade cuts the enamelled surface first and then the underlying material. Machines with sawing from below cut the underlying material first, making the enamelled part more fragile with th
- The motor and the direct transmission have been developed specifically for this purpose. In this way the engine power is transmitted completely to the disc.
- The electric pump gives the continuous flow of water improves the cooling and cleaning of the blade, increasing its life and optimising the cutting operation. The water pump is easy to inspect through the hole in the cutting surface.
- The water collection tank, made from shockproof thermoformed plastic, is light but very strong. The wide shape of the tank facilitates the collection of water to the pump and creates a stable base upon which to rest.
- To angle the cutting head 45° is a simple operation, without using tools or optional accessories. The cutting head can be locked in the 90° or 45° position for extra stability and precision.
- Includes: Tile Saw Stand, Side Table Extension, 10 in Diamond Blade (installed), Water Pump in Pan, Rip Guide, Protractor Guide, Spare Parts, Wrenches, Operator's manual
- HP: 1-3/4 @ 110 Volts
- Blade diameter: 10", 5/8 arbor, included
- Blade RPM: 2800, direct drive
- DBA (operator): 78
- Stand: Folding, included
- Max cut (L) with Plunge: 28" / 31"
- Side table: Yes, included
- Protractor: Yes, included
- Water pump: 110v, included
- L x W x H: 40" x 22" x 18"
- Weight: 70 lbs. 85 lbs. packaged
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.
Ratings & Reviews
2 reviews
Imer Combicut 250VA | "I think the Imer ...
by James -
"I think the Imer Combi-cut is awsome. Compared specifically to a saw like the Felker Tile MAster it give a lot more value. It cuts powerfully through porcelain tile and the best thing so far is cutting 18x18 on a diagonal, andvery precise. Since the tile doesn't move I believe the precision is greater than on a rolling table type saw. Its great."
mer Combicut 250VA | "The Imer Combicut 250 ...
by new user -
The Imer Combicut 250 which I purchased from you recently has really performed well. The first job that I used the Imer was for cutting 19"x19" Porcelain tiles and 1.5" x 6" decorative coping tiles which had to be outside and inside mitered. The saw performed flawlessly, it has made me realize that I made a wise investment. Thank you so much for your prompt shipping and handling my purchase professionally.