Husqvarna Ring Saw - Concrete 10" Depth, K970
🔷 This Husqvarna Ring Saw has a 10" capacity, weighs 30 lbs, powered by a 6.5 hp motor
🔷 Applications: Ideal for cutting concrete and brick, including window/door openings and pipe cutting for installation work
🔷 Includes: Grease gun, wooden transport box, tool kit, and Husqvarna Ring Saw
🔷 Active Air Filtration – Centrifugal air cleaning in three stages extends product life and service intervals
🔷 X-Torq® Engine – Provides more power, higher torque, and reduced emissions
🔷 SmartCarb – Automatic filter compensation maintains high power and lowers fuel consumption
🔷 EasyStart – 50% easier starts with DuraStarter and a dust-sealed starter for increased reliability
🔷 Poly V-Belt – Better power transmission, less tensioning, and increased product life
🔷 Vibration & Sound Dampening – Ensures comfort and convenience during use
🔷 Blade Diameter: 14"
🔷 Depth of Cut: 10"
🔷 Formerly Known as Partner Concrete Ring Saw
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.
Ratings & Reviews
5 reviews
Husqvarna Ring Saw
by Rich, the concrete cutter -
This ring saw is a good machine for cutting concrete or block in the 5" to 10" range. It is not good for the first 5 inches of material because the blade is too flexible. If you want a strait cut. You need to cut the first 5 inches whith a regular cut off saw and then swich to the ring saw to go deeper. It is valuable tool for getting through a 8" to 10" wall from one side but don't think that it's the only saw you'll need. It is safe to use as it does not have enough torque or speed to jump out of the wall very hard and the slow blade speed is actually good for cutting concrete. It will cut metal in concrete but the flex in the blade would make cutting thick metal a miserable experience, not to mention diamond blades are not the best suited for this purpose. Alltogether a good machine, but designed to be used by professional concrete cutters.
Gas Ring Saw
by Tommy -
This concrete ring saw is a great asset, but you need to know what you are doing when cutting. Its great for corner cuts for doors and windows but not cost effective to make the entire cut. I would recommend this to any professional concrete egress installer but this is not for the average joe user. Great saw, but cost per cut can be expensive.
deep cutting
by leo
if you need to cut deep cuts and a standard quickie saw wont do, you need to get this, you get 10" cutting. only downside its expensive in linear cutting life.
great saw
by Peerson T.
Great saw, 10" depth was just waht i needed. cuts slabs for egress windows very easily.
good performance, expensive but makes $$
by Milos
used to for patio work and it does great cuts. also did some nice sidewalk repare with it.