Husqvarna Hydraulic Ring Saw - K3600
- Power: 5.8 hp (4.3 kW), Engine: Hydraulic gear motor
- Max. pressure rate: 2500 psi (140 bar)
- Max. flow rate: 10 gpm (40 l/min)
- Weight, without blade: 17.4 lbs (7.9 kg)
- Blade Diameter: 14'' (350 mm)
- Cutting Depth: 10'' (260 mm)
- Please Note: This item cannot be returned to Toolfetch.com. If the item needs to be serviced or replaced, we recommend that you contact your local service center
More v
- The K3600 is a power cutter with truly unique characteristics and performance. Because its blade is driven from its periphery, not its centre, it can cut 10 inches deep (260 mm) with just a 14 inch blade! Its unique weight to power ratio and hydraulic power source makes it a hand-held cutter which is exceptionally efficient and easy to use. The world's only power cutter that can cut 10 inches deep with a 14 inch blade!
- None of the depth limitations of blades driven from an arbor apply to this cutter. Off-centre drive means the blade can cut almost as deep as its own diameter. To achieve a cutting depth of 10 inches (260 mm) on a conventional power cutter you would need a blade diameter of 25-30 inches (approx. 700 mm), which would be simply unmanageable on a hand-held cutter. A 10 inch cutting depth is enough to cut right through a normal wall, and if cuts can be made from both sides of a structure, this cutting depth can naturally be doubled. The new Partner K3600 is hydraulic-powered, and completely modular in design for easy servicing. The entire design concept of this new RingSaw makes for a genuinely efficient and easy-to-use cutter of very low weight.
- The drive system, a patented Partner solution: On the K3600 the blade runs on and is held in place by four lateral rollers. Two of these, the guide rollers, engage in a groove on the side of the blade, pressing it under spring tension forward and into a drive wheel. The drive wheel is powered by the hydraulic motor and has a V-shaped groove which engages with the blade, driving it rather as a pulley drives a V-belt. The other two rollers, backing rollers, hold the blade in place from the other side.
- The efficient power cutter, with countless applications: The Partner K3600 is a valuable alternative to wall saws and diamond chain saws, and is the ideal power cutter for a whole range of cutting jobs.
- Power output: 5.8 hp
- Hydraulic flow, max: 10 gal/min
- Hydraulic pressure: 140 bar
- Max cutting depth: 10 inch
- Blade diameter: 14 inch
- Weight (excl. cutting equipment): 18.3 lbs
- Vibrations front handle: 4.3 m/s²
- Vibrations rear handle: 6 m/s²
- Sound power level, guaranteed (LWA): 111 dB(A)
- Sound pressure level at operators ear: 99 dB(A)
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.