Husqvarna Concrete Saw - K1270 16"
- Engine: Air cooled, two cycle engine
- Displacement: 119 cc
- Power: 7.8 hp (5.8 kW)
- Weight, without blade, 14'': 30.2 lbs (13.7 kg)
- Standard arbor bushing: 1'' (25.4 mm)
- Cutting Depth: 6
- Suitable for: Heavy concrete cutting, Pile cutting, Asphalt cutting, Pipeline cutting, Demolition work
- Vibration levels for users are reduced by 35-43% for standard power cutters & 17-43% reduction for Rail power cutter.
- Improved startability of the machine due to redesign of the fuel tank, which runs longer on choke and decreases the risk of flooding the engine.
- Prepared for Fleet connectivity
- Please Note: This item cannot be returned to Toolfetch.com. If the item needs to be serviced or replaced, we recommend that you contact your local service center
More v
- Longer service intervals and less wear with Active Air Filtration: Cutting dust is the enemy of all petrol power cutters since it gets sucked into the engine and wears down piston, cylinder and bearings.Active Air Filtration, a combination of three separate filter systems, is one of the many Partner breakthroughs. The first active step separates the cutting dust from the intake air through centrifugal force. Remaining dust gets stuck in a second filter stage, made from a plastic foam filter, saturated with oil and having a large surface area. A third filter stage, made of pleated paper, provides additional reassurance that the intake air is free from dust. With Active Air Filtration, up to 90% of all the cutting dust is separated already in the maintenance free centrifugal stage.
- Maintaining power output for a longer time increases efficiency and reduces service requirements. In order to assure optimum power output, Partner developed a carburetor with built-in filter compensation, SmartCarb™. It maintains a constant air/fuel ratio. This maintains power output even as the filter becomes clogged. There is no need to adjust the carburetor manually. Together, Active Air Filtration and SmartCarb™ maintain high power output longer, reduce filter costs, lower fuel consumption, and reduce exhaust emissions.
- Reduced starting cord resistance yields easy, smooth start: A high-compression engine makes you pull hard on the starter cord. With the EasyStart decompression valve, this problem is solved easily and effectively. When you want to start, you just press the button that opens the valve. The EasyStart valve reduces the compression in the cylinder during the start, which means less wear on the starter assembly. EasyStart reduces the force necessary to start the engine by 50%. Dust and water proof transmission offers longer service intervals with fewer interruptions The K1250 Active has an enclosed drive belt. This protects the transmission in the cutting arm from dust and moisture. Having an enclosed transmission means reduced wear, longer service intervals and fewer service interruptions.
- New easy adjustable blade guard: To make cutting easier and more comfortable, Partner has developed a completely new blade guard with rubber bearings. A unique locking system makes it much easier to set the guard to the correct position during cutting. Reversible cutting arm to allow easy cutting close to wall or ground: With the K1250 Active, you can reverse the cutting arm. That makes it possible to cut close to a wall or the ground, limited only by the blade guard. Naturally, the excellent ergonomic properties of the machine are reduced somewhat, but for some jobs, the ability to reverse the arm makes all the difference.
- Self-lubricating clutch bearing increases clutch life and keeps dust away: The clutch bearing on the K1250 Active is automatically lubricated by the engine's lubricating system. This is an old Partner speciality. A hole in the crank shaft feeds oil to the clutch bearing, which keeps the bearing free from dust particles - and that increases life. Convenience and safety increase efficiency: Working with a Partner machine is more efficient and safer thanks to the ergonomic, balanced design with a sleek machine body, and the vibration isolated handle system with perfect handle spacing. The K1250 is easy and comfortable to work with, which increases the productivity of both machine and operator.
- Engine: Air-cooled 2 stroke engine
- Cylinder displacement: 7.25 cu.inch
- Power output: 7.9 hp
- Fuel tank volume: 42.3 fl oz
- Idling speed: 2700 rpm
- Vibrations front handle: 3.3/3.6m/s²
- Vibrations rear handle: 3.5/4.1m/s²
- Sound pressure level at operators ear: 103 dB(A)
- Soundpower level, guaranteed (LWA): 117 dB(A)
- Blade diameter: 14/16 "
- Max cutting depth: 5/6 "
- Weight (excl. cutting equipment): 30.2/31.7 lbs
- Fuel tank volume: 2.6 US pint
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.