Hand held Core Drill - 2-4", 4-6" With Rig, Husqvarna DM230
- Equipped with Elgard, when the machine is overloaded, the motor pulsates (rapid fluctuations in rpm). This occurs at a level just before the electronics cut the power to the motor.
- Functional ergonomics make the Husqvarna drill motors easy and convenient to operate.
- Softstart, an electronic current limiter, for softer starts. Full speed is reached about a second after the switch is turned on.
- Water-cooled gearbox (patent pending), where the water passes through the blade spindle, extends life of gearbox and gaskets.
- Standard attachment for the stand, and is mainly meant for wet drilling, but can be fitted with an adapter for dry drilling.
- Buttons and controls are ergonomically designed and easy to reach.
- Water hose and electric cable run parallel conveniently from the machine.
- Thanks to electronic rpm control, the job can always be done with optimum power.
More v
- Motor: 1 phase, electric
- Voltage: 230 / 110 V
- Amperage: 8 / 16 A
- Power: 1850 W
- Output RPM: 700 / 1700 / 3600 rpm
- Output RPM at full load: 580 / 1400 / 2900 rpm
- Power rating: 1100 W
- Speeds: 3
- Water coupling: G 1/4"
- Drill bit
- Max drill bit diameter, handheld: 3 inch
- Max drill bit diameter, stand: 6 inch
- Mounting collar: 2.36 "
- Spindle thread, outer: 1 1/4" 7 UNC
- Spindle thread, inner: G 1/2" or 5/8" 11 UNC
- Dimensions
- Weight: 15.6 lbs
- Sound and noise
- Sound pressure: 90 dB(A)
- Sound level: 94 dB(A)
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.