Greenlee EHP700LB Hydraulic Battery-Powered Pump
- INCLUDES: (1) Hydraulic Battery-Powered Pump
- More Intelligent with 3 in 1 program settings for crimping, cutting, and punching functions.
- Real-time crimp force monitoring with numeric digital display featuring IntelliCRIMP™ technology.
- Audible and visual fault alert.
- Real-time work history with downloadable PDF application.
- More Ergonomic with the EHP700LU weighing a mere 14.1 pounds.
- Padded shoulder strap included for ease of transport.
- Operates in any orientation.
- On-board as well as corded remote activation switches.
- More Power With the EHP700LU operating from a single 18V battery with an on-board storage for second battery.
- Pump provides real time charge status on both active and stored batteries.
- 18V lithium ion (Li-ion) battery provides 70% more cycles per charge.
- Connections are UL and cUL classified for copper and aluminum, when used with Greenlee tools on 7 brands of color-coded lugs and splices.
- Most competitive tools are UL approved with only one connector brand.
More v
- Operating pressure: 10,000 PSI (700 bar)
- Oil volume: 0.80 qt (0.76l)
- Flow rate of double stage pump:
- Low pressure range: up to 0.9 l/min
- At full pressure: 0.3 l/min
- Degree of protection: IP43
- Battery voltage: 18 V
- Battery capacity: 3.0 Ah, Li-Ion
- Charging time: 30 minutes
- Ambient temperature: 10°F - 104°F (-12°C to 40°C)
- Length: 14.0” (356mm)
- Width: 6.5” (165mm)
- Height: 11.5” (292mm)
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.