General Equipment EP8 Axial Blower, .33HP, 115VAC, 8D

Part# GE-EP8
$915.00
Ships Within 24-48 Hours
Package Shipping
Buying in Bulk? Request a QuoteSend a PO
Features
  • Designed to accommodate most non hazardous confined space ventilation requirements
  • Built with heavy-gauge aluminum and steel construction.
  • Applicable models certified by Canadian Standards Association (CSA).
  • All units offer independent laboratory certified air flow rates
  • Less air duct unless included as a standard component.
      • FEATURES
    • 8 inch diameter
    • radial flow-type
    • Blower designed for confined space entry and general ventilation
    • Operates from standard 115VAC, 60HZ power source
    More v
    Less ^
    • Operating Environment: Nonhazardous type locations
    • Power Source Type: 1/3 HP (.23Kw), 60Hz, 115 Volts, AC, Single Phase
    • RPM: 1725
    • Speed Control: Single Speed
    • Blower Type: Radial
    • Material: Cast aluminum
    • Wheel Type: Steel
    • Size: 8 inch (203 mm) Nominal Diam. inlet/ Outlet
    • Mounting: Rubber
    • Type: Anti-Vibration
    • Weight: 53 lbs (24 kg)
    • Dimensions: Height: 19-3/4 inch (502 mm) Length: 18-1/4 inch (464 mm) Width: 14-1/2 inch (368 mm)
    • Flow Rate: 1277.4 CFM (35.7 cmm)
    • One: 90 Degree Bend: 738 CFM (20.7 cmm)
    • Two: 90 Degree Bends: 578.8 CFM (16.2 cmm)
    WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

    Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.

    Back

    Ratings & Reviews

    No reviews available

    Be the first to Write a Review


    RECOMMENDED PRODUCTS