General Equipment CTS10 RIP-R-STRIPPER Floor Covering Removal Stripper
- The General CTS10 RIP-R-STRIPPER is an innovative and highly productive tool for the fast and easy removal of ceramic floor tiles and engineered wood flooring materials from concrete surfaces.
- The CTS10 floor stripper is an ergonomic solution for the age-old physical problems normally associated with covering removal projects.
- Significantly reduces back strains and joint discomfort by allowing the operator to work in a more vertical, upright position.
- Greater productivity increases jobsite material removal rates over outdated, conventional methods.
- Accepts popular, 35 lb. class, electric jackhammers manufactured by Bosch, DeWalt, Hitachi, Hilti and Makita.
- General’s exclusive GEN-TACH™ System allows for quick and easy breaker removal to aid transport in today’s smaller vehicles.
- Simple re-connection gets the CTS10 fully operational in seconds.
- FEATURES
- GEN-TACH™ breaker quik-release system
- 5-position, breaker adjustment system
- Anti-Vibe™ rubber isolated operator handle
- Ergonomically positioned foot push pad
- Easy-roll caster wheels minimizes push forces
More v
- Operating Environment: Nonhazardous type locations
- Power Source: Popular, 35 lb. class electric breakers operating from standard power sources
- Breaker Adjustment Positions: 5
- Breaker Tool Position Angle: 35⁰ to 75⁰ from floor depending on specific breaker
- Caster Wheels: 8 inch (203 mm) special easy-roll
- Outside Wheel Width: 21-1/4” (540 mm)
- Handle Width: 30-1/4” (768 mm)
- Transport Dimensions L x H(Less Breaker): Maximum: 39-9/16” (1005 mm) L x 29-5/32” (741 mm) H, Minimum: 39-9/16” (1005 mm) ) L x 27” (686 mm) H
- Accessory Tools: Standard jackhammer type
- Weight: 70 lbs (32 kg), less breaker
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.