Gearwrench 85076 3/8" Electronic Torque Wrench 7.1-99.6 ft/lbs
- Digitally Tracks Torque Measurement. Multiple Alerts When the Target Torque is Reached Prevent Over Torqueing of Bolts. Handle Vibrates, Buzzer Sounds & LED Light Shows Solid
- “Target Torque Alert” Gives a Warning as the Target Torque Setting is Approached, So There is Less Chance of Over Torqueing a Bolt
- Accurate in Clockwise Direction +/- 2% and +/-3% in a Counter-Clockwise Direction, From 20% to 100% of Full Scale
- 5 Torque Measurement Units Available for Working in Nm, Ft-lb, In-lb and Kgf-m, Kgf-cm
- 72-Tooth Ratchet Mechanism with a 5 Degree Swing Arc
- Handle and Housing are Oil and Solvent Resistant
- Requires 2 AA (alkaline) Batteries
- Meets or Exceeds ASME B107.28M
- Additional Scale: 88.5 in/lb - 1194 in/lb
More v
- Overall Length 15.75 in
- ASME Specification B107.28M
- Drive Tang Size 3/8 in
- Head Thickness 0.700 in
- Head Width 1.250 in
- Alt Scale Increments 0.1 ft/lb
- Primary Scale Increments 0.1 nm
- Set No
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.