Gearwrench 64-836G 3200 Foot Pound Reaction Bar Torque Multipler
- Made in the USA - Quality and Availability
- Low Input Torque is Required and Can Be Applied Easily By One Person Using Standard 1/2 Drive Torque Wrenches.
- Internal Planetary Gear System Provides Strength and Durability Plus An Output Torque Accuracy of +/-5%
- Square Drive Shears at 3% to 10% of Overload Torque to Protect Against Expensive Internal Damage and the Square Drive Can Then Be Easily Replaced.
- Built in Anti-Backlash Maintains the Multipliers Input Torque Allowing the Use of Ratcheting Head Torque Wrench
- Built in Angle of Turn Protractor Displays the Output Angle for Use on Fasteners Requiring A Specific Angle Rotation After Applied Torque.
- The Torque Multiplier with An Impact Socket on the Output Square is Placed on the Fastener to Be Turned with the Reaction Bar Restrained Against Some Substantial Part of the Equipment Being Serviced.
- Input and Output Rotation Directions Are the Same (If Input is Clockwise, Output is Clockwise). Torque Reaction on the Reaction Arm is in the Opposite Direction From the Input/Output Force
- Accuracy; +/- 5% CW From 20% to 100% of Wrench Capability
More v
- Base Unit of Measure: EA
- Country of Origin: United States
- Angle of Turm Protractor: Yes
- Country of Origin: United States
- Coupon Headline: 3,200 Foot Pound Reaction Bar Torque Multiplier
- Gear Ratio: 20.2:1
- Head Length: 6.375 in
- Head Width: 4.031 in
- Included Storage: Blow Mold
- Input Drive: 1/2 in
- Max Input Torque: 173 ft/lb
- Max Output Torque: 3200 ft/lb
- Output Drive: 1 in
- Overall Length: 20.000 in
- Packaging: Boxed
- Replacement Square Drive: 64-852
- Torque Accuracy (20-100% of Full Range): +/-5% Clockwise
- Torque Ratio: 18.5:1
- UPC: 781412648362
- Weight (Catalog): 22.10 lb
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.