Dixon Valve F1 Center Punch Band Clamp Tool For 5/8" Band Clamps,
- Hand tool for application of 5/8" band clamps.
- How to use:
- 1. Push tension handle all the way forward. Insert the clamp tail and push all the way into tool.
- 2. Tighten the clamp with short downward strokes. Tension handle should be in down position at completion of tightening clamp. If clamp tension needs to be released before locking, move slide back against spring. This raises the pulling dog.
- 3. Holding tension handle down, lock clamp by hitting punch at least twice with mallet.
- 4. Hold hose and raise the tool back and forth to break off clamp tail. Remove from tool by operating tension handle. when tail has moved through holding dog, raise tension handle and pull tail free.
More v
- Used On: 5/8" band clamps
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.