Baileigh Industrial R-cnc55 220v Three Phase Computer Controlled Hydraulic Double Pinch Profile Bending Machine
- The R-CNC55 roll bender from Baileigh Industrial will allow your shop to make more money with less scrap.
- Simply input the desired radii of the finished product load the material and voila out comes the finished product.
- This cnc roll bender has three driven rolls and can be operated in the vertical or horizontal position.
- The setup of the R-CNC55 roll bender is very easy, because of its integrated software.
- The software was designed especially for CNC roll bending applications, so it is extremely intuitive and easy to operate and program through the use of its touch screen operator pedestal.
- The top roll is adjusted hydraulically and the bottom rolls have a unique mechanical side to side adjustment for less length of straight at the beginning and end of the bend.
- The R-CNC55 comes with a unique digital measuring device for fast calibration, but will also measure the length of bend and the radius of each bend automatically, ensuring the most accurate roll bender ever.
- The frame of the R-CNC55 roll bender is made from extremely rigid plate steel that is electro welded for further structural strength allowing for no flex at full capacity. 40 programs
- 24 different parts (segments) per program
- 75 profile calibrations
- 2 Speeds (rotation of the rolls)
- 4 Speeds (Top roll movement)
- Top roll movement can be progressive or direct
- Progressive Top roll go to position with profile moving.
- Direct Top roll go to position with profile stopped.
More v
- Driven Rolls: 3
- Roll Adjustment: Hydraulic
- Pipe Capacity: Size: 2.5" (sch. 40) / Min. Dia.: 80"
- Round Tube Capacity: Size: 4.675" (.090") / Min. Dia.: 78"
- Square Tube Capacity: Size: 2.375" (.157")
- Flat Bar Easy Way: Size: 4" (.75") / Min. Dia. 36"
- Flat Bar Hard Way: Size: 3.5" (.50") / Min. Dia. 40"
- Angle Iron Capacity: Size: 2.36" (.236") / Min. Dia.: 28"
- Shaft Diameter: 2.16"
- Shaft Center Distance: Adj. (lower rolls)
- Upper Roll Dia.: 6.693"
- Lower Roll Dia.: 6.693"
- Motor: 7.4 hp
- Pinch: Single with Interchangeable Bottom Rolls
- Digital Readout: Yes
- Power: 220V / 3-phase
- Shipping Weight: 2500 lbs.
- *Optional Tooling: Some applications may require optional tooling. Please contact a Technical Sales Specialist at Baileigh Industrial with specific application details. Dimensions: L x W x H 52" x 35" x 62"
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.