Stick Welder - 200A Dual Voltage - Baileigh
- Portable IGBT Inverter stick welder
- Dual voltage can run on 120 volt or 230 volt single-phase power
- Intelligent voltage sensing – This welder knows what voltage it is plugged into and (when plugged into 120V) will limit the output of the welder
- Step-less Current Adjustment - adjustments are infinite and do not “click” between only a few options
- Thermal Overload Protected, will shut down welding if its temperature is too high
- Fan Cooled
- Anti-Stick / Hot Start - automatically increases output at the beginning of a weld to pre-heat the weld and electrode
- Arc Force, keeps arc more stable, with less sticking, when the electrode is close
- Lift ARC TIG capable – Torch not included
- High Open Circuit Voltage
- Generator safe and will tolerate large voltage variations
- Easily sourced consumables
- Includes electrode holder, ground clamp, 6-50P 250V plug, and adaptor to 120V plug
More v
- Cooling System Fan Cooled
- Maximum Current 200 Amps
- Power Dual Voltage - 120V/230V Single Phase
- Shipping Weight 20 lbs.
- Rated Input Current 20A (120V) / 40A (230V)
- Rated Input Capacitance 4.4KVA (120V) / 9.2KVA (230V)
- No-Load Voltage 78V (120V) / 78V (230V)
- Rated Working Voltage 23V (120V) / 28V (230V)
- Welding Current 15A~75A (120V) / 12A~200A (230V)
- Rated Duty Cycle 100% (120V) / 15% (230V)
- 100% Rated Duty Cycle 77A (120V) / 77A (230V)
- Efficiency 85%
- Power Factor .75
- Insulation Class H
- Enclosure Protection IP21S
- Special Notes Includes electrode holder, ground clamp, 6-50P 250V plug, and adaptor to 120V plug
- Certification CSA UL
- Shipping Dimensions (Inches) 18x10x14
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.