Oxygen Purge Monitor for Welding, 100ppm Concentration, B&B Pipe HP100SC
- The Handy Purge is specifically designed to indicate oxygen concentration down to 0.01% or 100 parts per million.
- Within this range, it is safe to weld and produce oxygen-free weld seams. (Exceptions include special metals such as titanium, zirconium, etc.).
- The Handy Purge can be used for continuous monitoring or for taking samples.
- The Handy Purge is ready to use straight out of the box and is extremely economical and user friendly.
- When taking samples, connect the short tube with the stainless steel probe to the sensor adapter.
- Then connect the vacuum pump to the correct side of the sensor adapter and squeeze to get a sample flow to the internal sensor.
- Calibrate the sensor to 20.90 on the 1/2 inch LCD screen by rotating the dial.
- Insert the steel probe into the weld seam and wait for the oxygen level to drop as shown on the LCD screen.
- Once the oxygen content is to the required specification, you may start the welding process.
- Includes: • Purge Monitor. • 3ft / 1m Hose. • Stainless Steel Probe • Vacuum Hand Pump • Plastic Carry Case • Calibration Certificate
More v
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.