Sliding Table Saw CNC, Baileigh

• This CNC table saw lets you store cut programs to ensure accuracy on high-volume, 3-shift schedules. With the sliding table, you need only one operator to cut 10-foot panels.
• 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm.
• Set the RPM by manually moving the belts to different gears.
• Digital readout (DRO) shows the blade speed to help with repeatability.
• Comes standard with a 12” blade, but accepts up to a huge 16” blade.
• Saw turns on a 1” arbor.
• Runs on 220-volt 3-phase power.
• 1 hp scoring blade spins at 8,000 rpm to ensure a crisp, clean cut. No need to spend extra time on sanding afterwards.
• CNC SYSTEM:
• 5.7” touchscreen control panel has a 300 program memory capacity.
• You can program the cutting width, blade tilt, and blade height of the main saw, as well as the scoring blade height.
• Save cut settings for a given application or schedule (for example, “Monday Cuts”), so they’re the same each time.
• Simply choose your desired cut program, and the system will take the table to the right settings. Then, manually push the wood towards the blade.

FENCES, TABLE, AND TRUNNION:

• Includes fences for ripping, crosscut, and angled cuts.
• Servo motor moves the rip fence into place as programmed. No need to read scales. Just dial it in.
• 2-position rip fence can lift out of the way for crosscutting.
• Cast iron frame backs the rip fence, keeping it parallel to the saw.
• Crosscut fence offers 2 DROs (one for the main gantry fence and one for the extension) for repeatability.
• Angle fence is scaled for precision.
• Heavy cast steel trunnion has boxed (not dovetailed) ways for extra rigidity.
• Enormous 15” x 125” sliding table is made of anodized, fully-extruded aluminum, so it’ll stay true and square.
• Table slides on 4 precision shafts made of polished steel for the smoothest slide possible.
• Fully welded base made of 12-gauge steel reduces vibrations, maintains alignment, and keeps cuts accurate.
• Wiper system in the shafts eliminates build-up from sawdust and grease.
• You can slide a whole sheet of 4’ x 8’ material so easily you’d never think there’s weight on it.
• Load lock prevents the table from budging when you’re setting down large sheets of wood.
• 4” main dust port that you can hook up to an extraction system and keep your shop clean.