Vestil PE-2566 Electric Edge-o-dockleveler

Part# VES-PE-2566
$2,729.00
On Order. Call Now.
Ships by Truck
  • The Edge-O-Dock leveler permanently attaches to the face of a dock. It is recommended for docks to be at least forty-eight (48) inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is twenty-seven (27) inches with a thirty-six (36) inch long ramping length available. A steel dock edge, or approach ramp is required for proper installation. The Electric Hydraulic Edge-O-Dock is the easiest to operate. After the truck is backed against the dock, push and hold the control button. The leveler raises and the lip will extend. The unit comes complete with motor, pump, control box, cylinder, lines and oil. The truck must pull out for leveler to return to stored position.
  • Uniform Capacity (lbs.): 25000
  • Service range above dock (in.): 5
  • Service range below dock (in.): 5
  • Bumper Width (in.): 2
  • Bumper Length (in.): 8
  • Bumper Height (in.): 18
  • AC Voltage/Phase: 115/1
  • Ramp Width (in.): 66
  • Ramping Length (in.): 27
  • Product Length (in.): 14
  • Product Width (in.): 92
  • Product Height (in.): 28.25
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.

Ratings & Reviews

No reviews available

Be the first to Write a Review

1 year