Powermatic 1792020 2020b Lathe, 2hp, 1 Or 3ph, 220v
- Sliding headstock with electronic variable speed and digital RPM readout for accurate speed adjustments
- Spindle lock and built in spindle indexing on the headstock for drilling hole patterns, routing flutes, and other equally spaced features
- Set of dead centers which hold a spindle for visual comparison
- Redesigned tool rest geometry allows for better chisel movement along the tool rest
- Laser etched quill is self-ejecting.
- Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not damage drive centers
- Attached tool caddy allows convenient access to centers, wrenches, etc.
- Tailstock has internal storage for additional accessories
- Chrome trimmed handwheels are ergonomic for a comfortable feel
- Standard Equipment:
- 2HP TEFC Motor
- Safety shield
- 3" face plate and face plate wrench
- 14" tool rest
- Multiple ball-bearing live center
- Brass tipped knockout rod
More v
The features you love on the 3520B lathe are now available in a smaller footprint. The PM2020 lathe is perfect for turners short on space, or projects where a short bed is convenient. Like its big brother, the PM2020 features a sliding headstock, electronic variable speed with low and high speed ranges, and the spindle lock. The enhanced features include a digital RPM readout, built in spindle indexing on the head stock, and a re-designed tailstock with internal storage, chrome trimmed handwheels, and a laser etched quill which is self-ejecting. Additional features include a two position mount for the optional bed extension, a sliding hammer knockout rod with brass tip, an attached tool caddy and a metal shelf for tool storage.
- Swing Over Bed (In.): 20
- Swing Over Tool Rest Base (In.): 17
- Distance Between Centers (In.): 20
- Headstock Movement: Full Length of Bed
- Spindle Bore: 5/8
- Tailstock Bore: 3/8
- Spindle Taper: MT-2
- Quill Taper: MT-2
- Ram Travel Quill Travel: 4-1/2
- Spindle Threads (In. x TPI): 1-1/4 x 8
- Outboard External Threads (In. x TPI): 1-3/16-18 UNC
- Spindle Speeds: High 125-3200/Low 50-1200
- Speed Range: 50-3200
- Number of Indexing Positions: 48
- Centerline of Spindle to Floor (In.): 44 (adjustable)
- Outboard Turning: 88
- Bed Construction: Cast Iron
- Motor Power (HP): 2
- Motor Phase: 3
- Motor Voltage (V.): 230 only
- Wiring Remarks: VFD will accept 1 or 3 phase power
- Motor Current (Amps): 6.2
- Recommended Circuit Size (Amps.): 20
- Height: 0.0000
- Length: 0.0000
- Weight: 582.0000
- Width: 0.0000
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.