Powermatic 1791303 Wp2510 Planer, 15hp 3ph 230/460v Helical Head
- Solid steel helical insert head with four-sided carbide insert tooling, eliminates need for adjustment after changing knives, reduces sound levels
- Digital readout and simple PC controller make quick and easy table height set ups
- Segmented serrated infeed roll with segmented chip breakers has 1/4" independent yield, for planing multiple height stock
- Massive gear box maintains positive feed by using a large chain drive with automatic chain tensioners, to power infeed and outfeed rollers
- 3" diameter infeed and outfeed rollers are supported by four large needle bearings for long life
- Quick-Set micro-adjustable lever easily raises and lowers table rollers from 0" to 0.050" at a touch
- Frame machined from heavy cast iron and extra wide side panels with gibs, offers rigid bed support and accurate alignment
- Solid pressure bar has wide foot for long wear and can be adjusted on both ends for precise feeding
- 3 speed feed selector allows you to quickly change feed rates
- Large 32-3/16 x 26 precision-ground table contains two adjustable table rollers for smooth feeding of uneven stock
- Dust hood features built-in 5" dust chute for efficient dust collection
- Standard Equipment:
- Helical head with four sided inserts
- Dust hood with 5" diameter dust port
- Segmented infeed rollers
- Segmented chip breakers
- Tool kit with pneumatic screwdriver for removing the cutterhead insert blades
More v
The POWERMATIC WP2510 Planer has a solid steel helical cutterhead with four-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting up table heights is quick and easy. The frame is machined from heavy cast iron and has extra wide side panels that offer rigid bed support and ensure accurate alignment. The planer's segmented, serrated infeed roll with segmented chip breakers has an independent yield of 1/4. Its automatically adjusting, chain drive gear box powers the 3" diameter infeed rollers, solid pressure bar and dual outfeed rollers for precise feeding of stock. The 3-speed feed selector gives woodworkers flexibility by changing feed rates quickly and easily. The WP2510 Planer has a large 32-3/16" x 26" precision-ground table which contains two adjustable table rollers for smooth feeding of uneven stock. The planer has a Quick-Set micro-adjustable lever that easily raises and lowers the table rollers from 0 to 0.05". The hood features a built-in 5" diameter dust chute.
- Style (Type): Planer
- Type of Cutterhead: Helical
- Knife Size (L x W x T): 15 x 15 x 2.5
- Cutterhead Speed (RPM): 5,000
- Cutterhead Diameter (In.): 3-3/8
- Cuts Per Minute: 30,000
- Number of Knives: 174 Four-Sided Inserts
- Maximum Depth of Cut (In.): 1/4
- Maximum Full Width Depth of Cut (In.): 1/8
- Maximum Planing Width (In.): 25
- Maximum Planing Thickness (In.): auto 9/manual 10
- Minimum Planing Length (In.): 10
- Feed Rate (FPM): 20/25/30
- Segmented Infeed Roller Diameter (In.): 3
- Outfeed Roller Diameter (In.): 3
- Bed Rollers Adjustable from Front: 0 - 0.05
- Maximum Height of Rollers Parallel to Tabletop (In.): 0.05
- Table Size (L x W) (In.): 32-3/16 x 26
- Table Support: 2 Column
- Column Diameter (In.): 2-1/2
- Digital Readout: Inch / Metric
- Dust Collection Minimum CFM Required (CFM): 600
- Dust Port Outside Diameter (In.): 5
- Motor Power (HP): 15
- Motor Phase: 3
- Motor Voltage (V.): 230/460
- Prewired Voltage (V.): 230
- Motor Current (Amps): 37/18.5
- Recommended Circuit Size (Amps.): 50/25
- Height: 62.0000
- Length: 54.0000
- Weight: 1760.0000
- Width: 35.0000
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.