Palmgren 9684520 11"x27" Bench Combination Engine Lathe & Vari Speed Mill, Stand Not Included
- Dual P5 tapper roller bearings on spindle
- Prismatic bed of solid aged cast iron - hardened to HRO 45 - 52 for long life
- Feed lead screw is supported and runs on two bearings
- Feed gear box is constructed of helical steel gears running in an oil bath
- Fast easy feed speed and direction changes with front mounted selector handles
- Precision machined slide with adjustable hand wheels with 0.002 " / 0.001 " scales
- Tailstock with adjustable precision scale of 0.02 mm / 0.0008 "
- 3 Jaw lathe chuck
- 4 Way tool post
- Safety lathe chuck and tool post guards
- Chip tray and splash guard
- Electronic variable speed ( MILL)
- All steel gear drive train (MILL)
- Built-in work light (MILL)
- Box column with hardened, ground and hand scraped ways (MILL)
- 2 MT machine tools spindle with draw bar (MILL)
- Precision machine tool spindle with guaranteed concentricity of .0005 " at the spindle nose (MILL)
- Drill chuck and arbor
More v
- Part Number: 9684520
- 4 Position Tool Post Height: 1/2 in.
- Bed Width: 7.09 in
- Center Height: 5.51 in
- Chuck Size: 5 in
- Compound Slide Travel: 5.60 in
- Distance Between Center and Compound Table: 3.49 in
- Distance Between Centers: 27.56 in
- Drilling Capacity: 0.63 in
- Gear Stages: 2
- High Range: 100 - 2900
- Lathe Height: 24.80 in
- Lathe Length: 54.72 in
- Lathe Motor: 1 HP / 115 V / 60HZ / 1PH
- Lathe Weight: 440.93 lb
- Lathe Width: 27.56 in
- Longitudinal Feed: 0.07 - 0.1 - 0.2
- Low Range: 50 - 1400
- Max Turning Diameter: 11.02 in
- Mill Height: 33.85
- Mill Length: 26.38
- Mill Motor: 1 HP / 115V / 60HZ/ 1PH
- Mill Weight: 227.08
- Mill Width: 21.65
- Milling Capacity of End-Mill Cutter: 0.79 in
- Milling Capacity of Inserted Tooth Cutter: 2.48 in
- Number of Steps: 6
- Pitch: 8 - 56 in
- Spindle Holding Fixture: MT2/M10
- Spindle Hole: 1.02 in
- Spindle Speed: 150 - 2000 RPM
- Spindle Taper: MT4
- Spindle Travel: 1.97 in
- Swivelling: +/- 90
- Table Length: 19.69 in
- Table Width: 7.09 in
- Tailstock Sleeve Travel: 4.13 in
- Tailstock Taper: MT2
- Top Slide Travel: 2.43 in
- T-Slot Size / Distance / Quantity: 0.47 in / 2.48 in / 3
- Working Radius: 7.28 in
- X-Axis Travel: 11.02 in
- Y-Axis Travel: 6.89 in
- Z-Axis Travel: 14.57 in
- Warranty: 3 year
- Country of Origin: CHINA
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.