Milwaukee 6880 10 Gauge Nibbler
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8 positions to make cutting easier. A 1.65 in. starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal. The 6880 is our heaviest nibbler with 10 gauge capacity in steel and 12 gauge into stainless. When perfect cuts are what you need, look to the Milwaukee line of nibblers.
- Length: 12-1/4"
- Shipping Weight: 9.3 lbs
- Tool Weight: 7.8 lbs
- Trigger Lock: On/Off
- Voltage: 120 AC/DC
- Capacity in Steel: 10 Ga
- Amps: 4
- Construction Type: Double Insulated
- Cord Type: 8 ft. Fixed
- Switch Type: Toggle
- Capacity in Stainless: 12 Ga
- Minimum Cutting Radius: 2-1/2"
- Starting Hole: 1-2/3"
- Includes: 10 Gauge Nibbler Allen Wrench Side Handle
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.