Launch Tech 775402 Obd Aid Breakout Box
OBD Aid Breakout Box. CanDo OBD Aid allows you to safely check the OBDII DLC port to diagnose exactly what is causing communication errors. It is a fast and easy way to properly check your DLC port prior to scan tool communication or ECU flashing. Conduct a safety check on OBDII DLC port prior to connecting your scan tool or flashing ECU
- Constantly monitor the battery voltage with warning beeps in the event of weak battery condition
- Warning beep will alert you when the voltage falls below 12V or when it rises above 15.2V while programming or coding
- Provides a quick check on the alternator charging condition
- Making voltage/frequency measurement at the pins during diagnosis communication with ECU when the engine will not start
- Detection of protocol and data communication during diagnosis and re-flash on the ECU.
- Colored LED lights display when a protocol is detected, grounds and voltage. Specifications:
- Operating Range: 7.0 ~ 24.0VDC Input
- Maximum Load: Up to 5.0 amps. Output
- Overload Protection: Yes, PTC Fuse
- Monitoring Voltages: Yes, below 12V, higher than 15.2V
- Protocols Detected: PWM(J1850), VPW(J1850), ISO 9141-2, DIS/ISO 14230-4, CANBUS (J-2284)
- OBDII Connector: 88mm length
More v
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.
FACTORY 1YR