Jet 202750 Hd-5t, 5-ton Wide Beam Clamp
- Welded all-steel frame and powder coat finish provide maximum durability and protection
- Clamp jaw is designed to distribute the load away from the beam flange edge increasing safety
- Used for quick mounting of a hoist on a broad range of beams up to 12-3/5 inches wide for increased versatility
- Complies with ANSI / ASME B30.17 and B30.20 standards
- Load tested to 125% of capacity with certificate
JET HD Series Beam Clamps come in capacities from 1 ton to 5 tons and can accommodate a beam up to 12 inches wide. Each JET beam clamp jaw is designed to distribute the load away from the beam flange and adjusts easily for a wide range of standard H or I beams. Available up to 5 Ton capacities, the HD Series has a greater beam flange width for wider beams.
- Load Capacity (Tons): 5
- Maximum Beam Flange Width (In.): 12-3/5
- Minimum Beam Flange Width (In.): 3-1/7
- Height: 8.6600
- Length: 21.6500
- Weight: 24.5000
- Width: 5.9100
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.