24" Husqvarna Block Saw - 7.5 HP, MS610
- Rips=Capable of 8x8x16 in Block , Diagonal Cut=N/A in, Depth of Cut 10 in
- Large jobs for cutting block, brick or pavers.Benefits
- High torque, continuous duty dual capacitor motorsmake efficient use of horsepower and reduce cutting time.
- New repaceable guide rails make alignment of the carteasier
- Only two pivot points for reduced saw maintenance and longer diamond blade life.
- Height can be controlled with a convenient crank controller foot pedal.
- The Sta-level blade guard keeps parallel to the cutting table for accurate cuts
More v
- Blade diameter, in (mm) 24 (350)
- Depth of cut, in (mm) 10 (127)
- Bladeshaft, rpm 2317
- Power source Electric
- Power, hp* 7.5/3 phase/480 volt
- Engine manufacturer Baldor
- Engine specifications T.E.F.C.
- Blade guard type, Sta-Level® One-piece steel
- Arbor size, in (mm) 1 (25.4)
- Bladeshaft bearings Ball bearings
- Conveyor cart Cast aluminum
- Water pump, high output Submersible
- Voltage 208/230
- Cycle/Current 60/AC
- Full load amps 14.5/13
- Starting amps 188/95
- Number of belts 2 V-belts
- Displacement, cu in (l) -
- Bore/stroke, in (mm) -
- Cylinders/cycle -
- Fuel capacity, gal (l) -
- Oil capacity, qt (l) -
- Air filter -
- Starter Capacitor
- Engine cooling Air
- Weight uncrated, lbs (kg) 332 (149)
- Weight crated, lbs (kg) 360 (161)
- Dimensions uncrated, in(mm) LxWxH 47-3/4 x 22 x 57-1/2 (1,213 x 559 x 1,461)
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.