Dixon Valve RD300EZHD 3" Heavy Duty 316ss Ez Bosslock Fem Coupler X Fnpt, 4-handles
- Resistant to accidental disconnection when dragged. The release lever opens in the direction opposite to the cam arm, so movements that tend to open the release lever also tend to close the cam arm.
- Rotating action helps keep the locking device free of debris.
- Designed to protect critical parts from impact and to withstand rugged use.
- Buna-N gasket
- If the rotating lever is not flush with the handle, it is not properly engaged.
- Under no circumstances should cam and groove couplings be used for compressed air or steam service!
- Under no circumstances should the EZ Boss-Lock cam arms be used on any fitting not specifically designed for their use.
- Pressure rating recommendations are based on the use of mating Dixon fittings at ambient temperature 70° with a standard seal installed. For use at elevated temperature or other unusual operating conditions, consult the factory.
- Designed for use with liquids, consult Dixon for specific recommendations
- Produced to Commercial Item Description A-A-59326D
More v
- Material: 316 Stainless Steel, Heavy Duty
- Seal: Buna-N
- Size: 3"
- Maximum Operating Pressure: 125 PSI
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.