Dixon Valve HUM100400CS 4" Male Frac Fitting W/fig 100 Nut
- One-piece design eliminates leak path experienced with two-piece threaded systems
- Long lasting and dependable forged hammer nut
- Durable and safe with reliable hose retention when crimped as specified
- Machined Iron to ASTM standards
- All stems are zinc plated
- Painted Carbon Steel forged nut
- 400 PSI working pressure with a minimum 4:1 safety factor (hose burst: hose working pressure) is only achieved with Dixon carbon steel ferrule part numbers CF400-6CSHD through CF400-16CSHD
- When assembling hose with abrasion resistant covers, such as UHMW polyethylene, you will need to use Dixon's heavy duty (HD) carbon steel ferrule part numbers CF400-6CSHD through CF400-16CSHD. Other size HD ferrules are available upon request.
- Pressure rating given at 70°F
- Used in the fast paced transfer of water and sand slurry at hydraulic fracturing sites.
- Water and petroleum transfer hoses rated from 100 to 300 PSI WP (4:1 SF) have excellent test results with the standard King Crimp ferrules CF400-xxCS)
More v
- Style: Figure 100
- Material: Iron
- Size: 4"
- Working Pressure: 400 PSI
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.