Belt Sander Tube Notcher - 3/4" - 3", Baileigh Tn-600
- If you are looking for a high quality top rated abrasive tube notcher made in the USA.
- Then look no further, the TN-600 from Baileigh Industrial is just what you are looking for.
- This abrasive Pipe notcher is a beast when it comes to chewing up metal.
- The TN-600 has a powerful 5hp motor that notches at full capacity with ease and only requires 220 volts of single phase power, so it can be used in almost all fabrication shops.
- It features a 6" x 79" belt that spins at 5400 feet per minute.
- The large 6" belt width allows it to notch up to 3" OD tubing at 60 degrees with optional mandrels.
- Many sizes of mandrels can be bought separately and are almost always in stock.
- The vise of the TN-600 has V-Jaws for a tight grip of the material and is perfect for light gauge to heavy gauge material.
- The vice is also self centering vise so the material can be changed over quickly and start in the proper position on the belt.
- The material is fed into the belt on the TN-600 by a smooth rail system.
- The system has an adjustable stop for repeatability.
- The vise also features a large degree dial to reference the degree of the notch more easily.
More v
- Motor: 5 hp
- Notching Capacity: (OD) .75" - 3"
- Angle Adjustment: 0 - 60°
- Belt Size: 6" x 79"
- Belt Speed: 5400 (fpm)
- Power: 220V / 1-phase
- Shipping Weight: 475 lbs.
- Shipping Dimensions: 78" x 48" x 52"
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.