Sheet Metal Notcher - Pneumatic, Fixed Angle, 11 Gauge, Baileigh
- The SN-F11-AN pneumatic corner notcher from Baileigh Industrial is the great machine for making perfect corners in sheet metal.
- The SN-F11-AN corner notcher has an 11 gauge mild steel capacity, so it can make quick work of most any job.
- And like its hydraulically operated brother, the SN-F09-MS, the SN-F11-AN sheet metal notcher has blades that are fixed at 90°, ensuring a perfect notch every time.
- An oversized table measuring 18 x 23.5 includes table guides, standard, to make production notches.
- The 5 blades on the SN-F11-AN corner notcher can be flipped and resharpened many times for even more life and cost savings.
- The SN-F11-AN air operated sheet metal notcher can run off of any air compressor that can put out between 90 and 115 PSI, which should allow this great tool to be used anywhere.
- An operator controlled foot pedal controls the notching action on the SN-F11-AN.
- At an operating pressure of 115 PSI the SN-F11-AN is capable of producing 50 strokes a minute with reduced stroke length.
More v
- Table Size: 18" x 23.5"
- Notch Angle: 90° (Fixed)
- Working Pressure: 115 psi
- Strokes Per Minute: 50
- Max. Capacity: 11 ga. (15 ga.)
- Power: 90-115 p.s.i.
- Shipping Weight: 500 lbs.
- Shipping Dimensions: 60" x 44" x 68" Max Notch Dimensions: 5" x 5"
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.