18" Jointer Planer - Programmable Table Height, 7.5 HP, 220V 3 Phase - Baileigh
- The JP-1898-NC jointer/planer from Baileigh Industrial is the next level in technology and performance.
- This great machine is a must have for any professional woodworking shop.
- It features a 18 working with that uses a helical cutter head for the best possible finish.
- To help provide this finish the machine is run by a 7.5 hp motor that runs on 220 volt three phase power.
- The planning station has a table length of 98 and a tilting fence that will go between 0 and 45 degrees.
- It also has a manual height adjustment for greater accuracy during the cut.
- The jointer station has a 63 table with a maximum cutter depth of 5/16 and uses a digital control to control the height.
- Variable speed rubber in and out feed rollers are also standard.
- These rollers run at a speed of 16 to 46 feet per minute.
- Contact a Baileigh Industrial representative for more information.
More v
- Table Size (Length): 98"
- Table Size (Width): 18"
- Rpm: 5700
- Fence Tilt: 45°
- Maximum Depth of Cut (Resaw): 1/4"
- Cutter Head Diameter: 4.75'
- Max Stock Width: 18"
- Number of Knives Helical Cutter Head
- Maximum Stock Height: 9.8"
- Minimum Stock Thickness: 3/16"
- Feed Speed: 16 to 50 FPM Variable
- Table Elevation Digital Control
- Power: 220V Three Phase
- Length: 103
- Width: 40"
- Height: 50"
- Horse Power: 7.5
- Weight (lbs): 3036
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.