20" Industrial Planer - 8" Max Cutting Height, 5 HP, 220V - Baileigh
- Looking for a good industrial planer with 20 capacity, then look at the IP-208 from Baileigh Industrial.
- The IP-208 planer quickly and quietly takes rough lumber and turns it into smooth boards, with its full 20 planning width.
- It uses heavy-duty cast iron and steel construction to keep the material steady and supported during the cut.
- A 220 volt single phase 5hp motor turns 4 blades at a whopping 5000rpm.
- That is enough RPM to take a maximum cut of 1/8 deep.
- The IP-208 has a maximum cutting height of 8 and can plane material down to ¼.
- In order to keep material straight and true the IP-208 has a fully cast iron 20 x 25-3/4 table with 15 extensions.
- Table size with extension is an impressive 20 x 55-3/4.
- Unlike other planers the IP-208 has 2 speeds that allow you to pick whats right for your project, either 16 or 20 feet per minute.
- Built in casters and a 4 dust port round out the IP-208 industrial planer.
More v
- Dust Collection Port: 5" Number of Outlets:1
- Table Size (Length): 55-3/4"
- Table Size (Width): 20"
- Spindle Travel: 5000
- Maximum Depth of Cut (Resaw): 1/8"
- Cutter Head Diameter: 3-1/4"
- Max Stock Width: 20"
- Number of Knives: 4
- Maximum Stock Height: 8"
- Minimum Stock Thickness: 1/4"
- Minimum Stock Length: 8"
- Feed Speed 16/20: FPM
- Table Elevation Manual
- Power: 220V Single Phase
- Horse Power: 5
- Weight (lbs): 880
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.