Hydraulic Press Brake - 78", 50 Ton Cap, 2-Axis - Baileigh
- Delivers 50 tons of pressure over its entire 78" length.
- Long enough to bend 6-foot pieces of mild steel.
- Runs on 220-volt 3-phase power.
- Industrial-grade hydraulic system with a Vickers/Eaton® pump will last for many years at peak capacity.
- NOK® hydraulic seals from Japan are some of the best in the industry. They'll help the hydraulics run smoothly.
- Torque tube connects the 2 hydraulic cylinders, so they stay synchronized and parallel to the bending table at all times.
- Chain drive linkage keeps hydraulic cylinders in time with each other, so the machine remains balanced and lasts longer.
- Hydraulic cylinders are located in the back of the machine for convenient fluid changes.
More v
- Table Length: 78.7"
- Back Gauge Length: 15.7"
- Return Speed: 3.5" / sec.
- Maximum Pressure: 45 ton
- Throat Depth: 7.87"
- Stroke Distance: 3.93"
- Table Width: 5.5"
- Approach Speed: 3.93" / sec.
- Back Gauge Motor: 1/2 hp
- Bending Speed: .393" / sec.
- Main Motor: 4 hp
- Distance Between Housings: 64.5"
- Distance From Table To Ram: 11.81"
- Power: 220V / 3-phase
- Shipping Weight: 6000 lbs.
- Shipping Dimensions: 98" x 75" x 88"
WARNING: This product contains a chemical known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Please click on the desired file to open it in another browser tab. If you'd like to download the document, you can do that from your browser controls.