|
|
| • | Works on all CV joints using Band-It® and Band-It Jr.® type boot bands. Use 5/8" socket or wrench to wind and crimp new band on boot. Tool is easily disengaged ... |
|
$9.58
|
|
|
|
|
| • | Easily removes the top steering stabilizer link so the strut can be replaced.Set Includes: |
| • | 8mm Socket (LIS3410)-Taurus, Sable, Windstar ’96-’04; ’04 and newer F... |
|
$22.18
|
|
|
|
|
| • | Quickly flushes out old grease and repacks bearings with less mess |
| • | The Handy Packer™ works on bearings up to 3-1/2" O.D. |
|
$17.09
|
|
|
|
|
| • | Quickly And Safely Removes Stuck Pitman Arms On Trucks 2 Ton And Larger. |
| • | The tool wedge opens the Pitman arm slots for easy removal. Can be used with an impact... |
|
$48.97
|
|
|
|
|
| • | For seperating ball joints, tie rods, pitman arms and other uses. Six tools in one for exceptional versatility and value. Kit consists of three forks and two ha... |
|
$33.16
|
|
|
|
|
| • | Designed to work on even the most stubborn Pitman arm pulling jobs |
| • | Position puller jaws over Pitman arm and turn center screw to free Pitman arm |
|
$22.46
|
|
|
|
|
| • | Universal steering wheel puller for most makes and models. Screw pad protects end of steering shaft. Heavy-duty for long wear. Includes: Puller screw, screw pad... |
|
$15.90
|
|
|
|
|
| • | Works on Tie Rods With Inaccessible FlatsMany inner tie rod end sockets do not have a complete hex on the full length of the socket. The rounded socket ends pr... |
|
$60.96
|
|
|
|
|
| • | The universal wrench is designed to remove and install all inner tie rod sockets up to 1-31/64” regardless of the rod socket configuration. The wrench head has... |
|
$29.04
|
|
|
|
|
| • | Works On Inner Tie Rods With Inaccessible wrench flats on many trucks and SUVs. |
| • | The long socket slips over tie rod end and crows foot engages on socket for eas... |
|
$51.28
|
|
|
|
|
| • | Fits Domestic Lock Plates, Including Tilt and Telescoping. Tool depresses lock plate for easy removal of lock ring. Allows access to steering column for repair ... |
|
$15.94
|
|
|
|
|
| • | Set Includes 8 Drivers for Driving Inner and Outer Pinion Bearing Races on 1/2 and 3/4 Ton Ford, Dodge and GM Pickups. Use the extended, two-piece handle for d... |
|
$90.87
|
|
|
|
|
| • | ? Removes the hub lock on 4WD F-Series Super Duty Ford Pickups? Pliers quickly and easily remove hub lock without damage to the hub lock cover? Pliers come with... |
|
$40.99
|
|
|
|
|
| • | This is an inexpensive, but super safe strut spring compressor |
| • | Fits all strut spring sizes, import and domestic |
|
$49.20
|
|
|
|
|
| • | Removes GM10 Model MacPherson Strut Cartridge on the Car!Tool completely removes and installs strut cartridge through the strut tower. Comes with handle, span... |
|
$38.00
|
|
|
|
|
| • | Holds lower control arm out of the way for strut and CV axle service. |
| • | A tool that will revolutionize C-V Axle and Strut Repair. |
|
$129.81
|
|
|
|
|
| • | The LT 825 allows the mechanic to tap out all bearing hub rotor assemblies in all Hondas and Acuras while keeping the wheel bearing's seal intact and preventing... |
|
$57.44
|
|
|
|
|
| • | 2PC UNIVERSAL/CAMRY APPLICATiON |
|
$60.21
|
|
|
|
|
| • | ? The specific opening between the lines of 21/32" does the job quickly and properly. |
|
$27.31
|
|
|
|
|
| • | ? The opening between tines is 15/16", which will handle ball joints with a minimum of shock to the assembly. |
|
$27.31
|
|
|
|
|
| • | Smooth long stroke 4-ton ram with remote hydraulic pump provides effortless, safe, one man operation |
| • | Angle rotatable spring clasp bra... |
| • | Free Ground Shipping |
|
$504.94
|
|
|
|
|
|
$27.85
|
|
|
|
|
| • | Here's the answer! When servicing king pins, this unit is quickly mounted on the front axle...a unique "swinging gate" feature makes s... |
| • | Free Ground Shipping |
|
$1,859.05
|
|
|
|
|
| • | Enables you to remove and install bushings ranging from 3/8" to 1-3/8" in diameter, as used in cars, trucks, tractors, construction equipment, electric motors,... |
|
$30.85
|
|
|
|
|
| • | Reversible 2-in-1 tool removes and installs press-fit alternator and power steering pump pulleys. |
| • | Also removes and installs other press-fit pulleys with a hub... |
|
$32.07
|
|
|
|
|
| • | Enables technician to adjust toe, obtain a straight steering wheel, and correctly center the tie rod end. Permits easily reaching and breaking loose the tire r... |
|
$101.29
|
|
|
|
|
| • | Consists of one Pitman arm and four tie rod tools in a blow-molded storage case. |
|
$84.53
|
|
|
|
|
| • | For removal of the front hub assembly, necessary for wheel bearing or brake rotor service. Provides the mechanical advantage and straight pull not possible wit... |
|
$102.52
|
|
|
|
|
| • | This kit includes five popular tools used for servicing Pitman arms, ball joints, and tie rods on most vehicles. |
| • | Two Pitman Arm Pullers for large or small ball... |
|
$118.55
|
|
|
|
|
| • | Servicing MacPherson struts is convenient and affordable with this compressor. It fits a wide range of struts and requires no special adapter shoe. |
| • | Safety loc... |
|
$251.69
|
|
|
|
|
| • | New patented design saves time, increases productivity. |
| • | Labor intensive removal of steering sector is now unnecessary. |
|
$72.86
|
|
|
|
|
| • | This set allows for the removal and installation of press-fit ball joints on many GM and Ford light-duty trucks, vans and SUVs through 2003; Dodge light trucks ... |
|
$265.00
|
|
|
|
|
| • | Used to remove shock linkage, tie rods, and ball joints. Also for general service on many cars and light trucks. |
| • | Size: 16" long, 15/16" Fork Spread |
|
$19.78
|
|
|
|
|
| • | Increase the versatility of your 6490 HubTamer |
| • | Design allows for a straight pull on the hub while removing it from the spindle assembly. |
|
$31.19
|
|
|
|
|
| • | Taking a Winner and making it Better! |
| • | Works on virtually all floating and trapped rotors found on domestic and import vehicles. |
|
$300.82
|
|
|
|
|
| • | The OTC StrutTamer Elite stand features steel frame construction with two wheels that allow you to easily tilt the stand back and move ... |
| • | Free Ground Shipping |
|
$196.36
|
|
|
|
|
| • | Four-point locking jaws securely hold the spring in place |
| • | Open-ended design means you can take the strut in and out, quickly and easily. |
|
$572.02
|
|
|
|
|
| • | Simply the most effective compressor for virtually any straight, conical, or offset spring. SUVs and Light Trucks ? Four-point locking jaws securely hold the sp... |
|
$681.72
|
|
|
|
|
| • | Three-piece kit contains specialty ball joint adapters for use with the industry standard OTC No. 7248 C-frame. Designed to work with the following Ford vehicle... |
|
$59.23
|
|
|
|
|
| • | An ideal companion to the 7185 the 7005 is a real timesaver when it comes to installing power steering pump pulleys and GM press-on water pump pulleys. Wont d... |
|
$44.65
|
|
|