|
|
| • | Alloy steel, heat treated blade for strength. |
| • | Low profile blade for access into tight spaces. |
|
$9.93
|
|
|
|
|
| • | Remove and install O-rings and small oil seals. Hardened tip keeps a sharp point. Tool is ideal for transmission, power steering pump, disc brake and air condit... |
|
$6.13
|
|
|
|
|
| • | Five-piece set includes a 5" aluminum handle knurled for a sure grip. It also includes the following heat-treated, high carbon steel picks: O-ring, 90?, straigh... |
|
$11.07
|
|
|
|
|
| • | ? Use tool to remove oil and grease seals on automobiles and light trucks.? Puller has 2 tip sizes for most applications.? To use, insert tip behind seal and us... |
|
$8.62
|
|
|
|
|
| • | The set includes part numbers 3470, 3474 and 3475. The tools included are ideal for use anywhere a hook/removal tool, spring removal tool or a sharp punch is r... |
|
$18.62
|
|
|
|
|
| • | ? 2 Ton ? Max Reach: 3-1/2"? MAx Spread: 5" ? Screw Size: 3/8x 24? Screw Length: 4-7/8"? Thickness Upper/Lower: 3/16-1/8? Width Upper/Lower: 5/16-1/2? Weight: 1... |
|
$15.97
|
|
|
|
|
| • | ? 5 Ton ? Max Reach: 5-3/4"? MAx Spread: 8" ? Screw Size: 9-1/6x20? Screw Length: 7"? Thickness Upper/Lower: 1/4-5/16"? Width Upper/Lower: 3/8-3/4? Weight: 1 lb... |
|
$34.84
|
|
|
|
|
| • | Includes: Awl, Hook Tip, 90 Degree Tip, Small Awl, Small Hook Tip, Small 90 Degree Tip, and Small Combination Tip. |
| • | Comes in a molded storage case. |
|
$29.72
|
|
|
|
|
| • | This kit provides a wide range of puller applications such as: Flange-type axles, oil seals and other press fit parts. Jaws can be set up for 2 or 3 jaw intern... |
|
$101.70
|
|
|
|
|
| • | Pulls oil and grease seals. Simply insert the tip of the tool behind the oil or grease seal, press and pull. Leverage works for you. Two size tips reach in and ... |
|
$9.92
|
|
|
|
|
| • | Removes Cam Shaft and Crank Shaft Seals Without Damage to the Shaft. |
| • | Engage the adjustable hook behind the seal. Brace the push rod against the engine head and p... |
|
$12.35
|
|
|
|
|
| • | Specifications:Maximum Reach: 2-1/8"Maximum Spread: 3-1/4"Weight: 5 oz. |
|
$31.78
|
|
|
|
|
| • | Specifications:Maximum Reach: 2-1/8"Maximum Spread: 3-1/4"Weight: 8 oz. |
|
$39.74
|
|
|
|
|
| • | Specifications:Maximum Reach: 3-1/4"Maximum Spread: 4"Weight: 14 oz.(Reversible Jaws) |
|
$29.50
|
|
|
|
|
| • | Specifications:Maximum Reach: 3-1/4"Maximum Spread: 4-3/4"Weight: 1 lb. 5 oz.(Reversible jaws) |
|
$38.41
|
|
|
|
|
| • | Specifications:Maximum Reach: 3-1/4"Maximum Spread: 6"Weight: 1 lb. 12 oz.(Reversible Jaws) |
|
$33.10
|
|
|
|
|
| • | Mechanical Grip-O-Matic® PullerThis puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. Rever... |
|
$38.41
|
|
|
|
|
| • | Specifications:Maximum Reach: 3-1/4"Maximum Spread: 7"Weight: 2 lbs. 12 oz.(Reversible Jaws) |
|
$46.36
|
|
|
|
|
| • | Mechanical Grip-O-Matic® PullerThis puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. Rever... |
|
$52.98
|
|
|
|
|
| • | Mechanical Grip-O-Matic® PullerThis puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. Speci... |
|
$189.84
|
|
|
|
|
| • | This manually operated, screw-powered device removes cylinder sleeves from most truck, bus, and tractor engines |
| • | Not recommended for Mack engines (use No. 1202 s... |
|
$489.00
|
|
|
|
|
| • | SET |
| • | Free Ground Shipping |
|
$5,779.97
|
|
|
|
|
| • | EQUIP SERVICE SET |
| • | Free Ground Shipping |
|
$9,209.20
|
|
|
|
|
| • | HYDRAULICS4002 - Single stage hydraulic hand pump assy.4121 - 30-ton ram with threaded insert 24815 - Tee adapter 9650 - Pressure gauge... |
| • | Free Ground Shipping |
|
$3,252.79
|
|
|
|
|
|
$5,257.02
|
|
|
|
|
|
$1,697.70
|
|
|
|
|
| • | Designed to remove oil and grease seals when servicing cars, SUVs and light trucks without damaging the housing or bearing. |
| • | Hook tips in two sizes and profess... |
|
$10.21
|
|
|
|
|
| • | For a wide range of pulling jobs, including: bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, and harmonic balancers. Set... |
|
$113.91
|
|
|
|
|
| • | ? Pulls flange-type rear axles and most front-wheel drive hubs? Internal and external jaws provide a variety of combinations to pull bearings, gears and seals. ... |
|
$86.40
|
|
|
|
|
| • | For pulling jobs requiring an internal pull, such as pilot bearings. |
| • | Set includes four collets which fit a wide range of applications. Select the appropriate s... |
|
$128.15
|
|
|
|
|
| • | Two specialty pullers in one box. You get a flange-type puller for removal of harmonic balancers, timing gears, and other parts with two or three tapped holes.... |
|
$62.92
|
|
|
|
|
| • | Use for 2/3-way internal and external jobs |
| • | Attachments include a dent puller, internal/external pulling jaws, hook attachments, rear axle pulling attachment, an... |
|
$142.89
|
|
|
|
|
| • | Includes: Slide hammer with 5 lb. hammer, rear axle pulling attachment, 3-way cross head, cone, 2-way cross block, puller hook attachment, pulling jaws(3) for i... |
|
$287.89
|
|
|
|
|
| • | Can be used with OTC 1123 bearing puller attachment, 679 pulley pulling attachment, 1150, 1151, 1152, 1153 internal pulling attachments |
|
$105.08
|
|
|
|
|
| • | Removes and installs press-fit parts. |
| • | Can be used with Nos. 1124 and 1130 bearing pulling attachments, or Nos. 679 and 680 pulley pulling attachments. May also... |
|
$193.59
|
|
|
|
|
| • | Ideal for separating wires, removing small fuses, "O" rings, retrieving washers and loose parts too small to pick up with fingers. |
| • | Each hook and pick is made o... |
|
$12.87
|
|
|
|
|
| • | Patented quick-change design goes from 2 to 3-arm puller in seconds-no tools needed! |
| • | Can be assembled to make a two or three jaw puller when additional stabili... |
|
$90.39
|
|
|
|
|
| • | Hooker tools are great for removal of radiator hoses from inlets, outlets and clamps. Excellent for cotter pin removal. Use on body clips, moldings and windshei... |
|
$7.89
|
|
|
|
|
| • | Hooker tools are great for removal of radiator hoses from inlets, outlets and clamps. Excellent for cotter pin removal. Use on body clips, moldings and windshei... |
|
$13.33
|
|
|
|
|
| • | Hooker tools are great for removal of radiator hoses from inlets, outlets and clamps. Excellent for cotter pin removal. Use on body clips, moldings and windshei... |
|
$17.43
|
|
|