|
|
| • | ? The industry standard in high quality masking tape - leaves a clean edge without residue |
|
$150.42
|
|
|
|
|
| • | ? The industry standard in high quality masking tape - leaves a clean edge without residue |
|
$100.75
|
|
|
|
|
|
$4.42
|
|
|
|
|
|
$10.73
|
|
|
|
|
| • | Specially made for use with 3M™ Stikit™ discs |
| • | Vinyl pad face provides good disc adhesion yet allows easy disc removal |
|
$27.72
|
|
|
|
|
| • | Designed to be used with compounding pads and foam pads in 8" and 9" diameters |
| • | 5/8" threads for use on most slow-speed polishers |
|
$47.63
|
|
|
|
|
| • | Utilizes a 3m patented convoluted foam face |
| • | When used with Perfect-It™II rubbing compound or equivalent, microfine 2000 grade scratches are effectively removed... |
|
$34.25
|
|
|
|
|
| • | Utilizes a 3m patented convoluted foam face |
| • | Produces a wheel mark free automotive paint surface when used in conjunction with Perfect-It™II Foam Polishing Pad... |
|
$34.25
|
|
|
|
|
| • | Uniquely formulated to remove compound swirl marks |
| • | Leaves a wheel mark free finish when applied with the Perfect-It™ Foam Polishing Pad (3M 5725). |
|
$36.90
|
|
|
|
|
| • | 54.6 yds (50 meters) in a dispensing box |
| • | Foam tape designed to be used in masking jambs, hood or deck lid openings or other areas of a vehicle which need to be... |
|
$50.19
|
|
|
|
|
| • | ? A multi-purpose, non-paintable aerosol coating for under carriages, wheel wells, frame rails and fenders? Designed to protect metal from corrosion and abrasio... |
|
$8.03
|
|
|
|
|
| • | ? Gun Setups in One Kit to cover all your painting needs - Primer/Filler to Top Coats!? HVLP for less overspray and wasted paint? Stainless Steel Needle and Noz... |
|
$88.72
|
|
|
|
|
| • | Quick-lock" design for fast and easy assembly and disassembly |
| • | Long handle provides ease of pumping |
|
$201.93
|
|
|
|
|
| • | Specialty tool developed for the removal of pinstripes, adhesive, double faces tape with Astro's Smart Eraser Pad |
| • | Geared at 4000 RPM |
|
$108.03
|
|
|
|
|
| • | For use with spot weld drills or standard drills |
| • | No pilot hole design leaves underside panel intact while completely removing spot weld on top panel |
|
$12.65
|
|
|
|
|
| • | Adjustable depth stop which allows you to drill out just the spot weld and not the panel beneath |
| • | Drill bit removes the entire spot weld, eliminating the need f... |
|
$217.87
|
|
|
|
|
| • | Provides accurate measurement and adjustment of air flow for spray guns and other air-operated tools and equipment |
| • | Ensures accurate and consistent air pressure... |
|
$40.19
|
|
|
|
|
| • | Ideal for restoring aluminum and magnesium Rims, Engine Parts, Motorcycle Parts and Plastics (1800 RPM’s) |
| • | Easily removes clear coats from weathered wheels. |
|
$87.60
|
|
|
|
|
| • | Low Consumption |
| • | Effective design saves time with minimum of 65% transfer efficiency |
|
$61.72
|
|
|
|
|
| • | Low Consumption |
| • | Effective design saves time with minimum of 65% transfer efficiency |
|
$63.48
|
|
|
|
|
| • | Pad is for use with the AP 1232 |
| • | Pad is molded rubber with 5/16"-24 thread arbor |
|
$9.63
|
|
|
|
|
| • | Pump-less unit eliminates major problem of other units |
| • | 2.5 gallons (10 liter) solvent tank |
|
$450.17
|
|
|
|
|
| • | Lightweight, easy to use and portable |
| • | Dispenses rolls up to 18" in width |
|
$35.78
|
|
|
|
|
| • | Tough fiberglass hammer handles for extended service life |
|
$27.86
|
|
|
|
|
| • | Great for working on doors, fenders, hoods and bumpers |
| • | Lightweight work bench with a capacity of 500 lbs. |
|
$34.70
|
|
|
|
|
| • | Stand is lightweight but with a 500 lb. load capacity. |
| • | Stand folds to small footprint for storage. |
|
$40.77
|
|
|
|
|
| • | 5/16" punch |
| • | Performs hole punching and panel crimping |
|
$82.52
|
|
|
|
|
| • | Handles any panel or bumper to make repairs and refinishing easy. |
| • | Comes with 8 adjustable bars to fit almost any panel securely. |
|
$156.92
|
|
|
|
|
| • | Special body panel drill bits for use in autobody repair. |
|
$5.10
|
|
|
|
|
| • | "Binks 7 Type" |
| • | Designed for high material delivery, will handle a range of viscosities from fine surface finishes to heavy body coatings |
|
$50.79
|
|
|
|
|
| • | All-purpose easy-to-clean paint spray gun |
| • | Two-piece construction with gun featuring exclusive air valve design |
|
$57.01
|
|
|
|
|
| • | Holds 4 paper rolls from 16"-22" and 4 tape rolls. |
| • | Nonskid rubber wheels make it possible to move masking station to job. |
|
$62.90
|
|
|
|
|
| • | Precision machined aluminum body components, hardened shafts, and ball bearing construction throughout, for long life and maximum durability to provide many yea... |
|
$248.74
|
|
|
|
|
| • | This gun's patented cap nozzle design and use of lower volume of air finely atomizes paint creating a smooth finish with minimum overspray |
| • | Lower cfm consumpti... |
|
$86.28
|
|
|
|
|
| • | This gun's patented cap nozzle design and use of lower volume of air finely atomizes paint creating a smooth finish with minimum overspray |
| • | Lower cfm consumption |
|
$85.37
|
|
|
|
|
| • | 2 pc gravity feed gun holder works great with all gravity feed spray guns |
| • | Top strainer holder may be removed for additional clearance |
|
$8.69
|
|
|
|
|
| • | Fast working speed & wide fan pattern |
| • | Anodized gun body |
|
$97.75
|
|
|
|
|
| • | Includes bars for two (2) paper rolls and four (4) tape rolls |
| • | Large adjustable washers maintain paper alignment |
|
$74.11
|
|
|
|
|
| • | Sturdy construction and compact design makes this 2-1/4 gallon (8517cc) pressure tank the ideal choice for both amateur and professional. |
| • | Pressure spray gun equi... |
|
$210.57
|
|
|
|
|
| • | Unibody head construction eliminates leakage after cleaning. |
| • | Dual action trigger can spray air only or air and paint. |
|
$65.57
|
|
|