|
|
| • | Small lightweight unit attaches to any spray gun (including HVLP) for accurate air pressure regulation |
| • | A true diaphragm regulator |
|
$36.59
|
|
|
|
|
| • | Will not drip when spraying in any position |
| • | No accidental spills or damaged work |
|
$37.06
|
|
|
|
|
| • | Uniquely designed durable, non-marring tool with a chisel end that allows the technician to repair body lines in sheet metal without scrapping off rust protect... |
|
$16.29
|
|
|
|
|
| • | Easily Seperate Spot Welded or Bonded Panels |
| • | Save up to 15 minutes per panel replacement. |
|
$25.15
|
|
|
|
|
| • | Sharpened on three edges. The sharp end allows for penetration between the panels and both side edges allow for side impact to drive the panels apart without d... |
|
$27.68
|
|
|
|
|
| • | Hooks above lip of the wheel opening. |
| • | Two unique curvatures (one each side) to fi t most cars. |
|
$37.44
|
|
|
|
|
| • | Hooks above lip of the wheel opening. |
| • | Two unique curvatures (one each side) to fi t most cars. |
|
$33.26
|
|
|
|
|
| • | Bushing tool’s off-set design allows for easy access to both door half and body half hinges to easily punch out bushings and maintains bushing alignment for qu... |
|
$20.21
|
|
|
|
|
| • | One man operation - geatly reduces labor time. |
| • | Padded, remoeable side rails. |
|
$76.96
|
|
|
|
|
| • | Removes Runs & Dirt Nibs. |
| • | Honed tips of teeth shave run without digging into paint. |
|
$14.73
|
|
|
|
|
| • | The XTension Arm Kit allows body shop technicians to utilize existing shop X-Work stands to paint bumper edges and fender angles which cannot be done currently ... |
|
$50.00
|
|
|
|
|
| • | Bumper cover is secured to tree by easily adjusted chains. |
| • | Support rails swivel to fit any umper cover. |
|
$134.79
|
|
|
|
|
| • | Panels load easily and quickly! |
| • | Center post design allows access to edge, bottom, and both sides of panel. |
|
$282.97
|
|
|
|
|
| • | ? Precision high quality double action air brush ? Double action function allows user to draw fine lines and do color blending? Pistol trigger design provides f... |
|
$104.28
|
|
|
|
|
| • | Meets ICAR standard |
| • | Head swivels 360 degrees for ease of operation |
|
$116.81
|
|
|
|
|
| • | Meets ICAR standard |
| • | Both 3/16" (5mm) and 5/16"(8mm) punch/flange heads included in one set |
|
$127.08
|
|
|
|
|
| • | Heavy-duty blow molded case |
| • | Side handle for more comfortable and efficient use |
|
$124.41
|
|
|
|
|
| • | Includes: 1.0mm Detail Gun, 1.4mm Production Gun, 1.7mm Production Gun |
| • | Locking pressure regulator with gauge |
|
$89.49
|
|
|
|
|
| • | Versatile spray gun kit includes:1.4mm color and clear coat gun1.7mm primer gun |
| • | Locking pressure regulator with gauge |
|
$112.85
|
|
|
|
|
| • | Contains all the necessary brushes and tools to effectively clean spray guns including HVLP paint spray guns. |
| • | Can be used to clean gravity feed, siphon and un... |
|
$10.59
|
|
|
|
|
| • | Quickly removes spot welds holding sheet metal. Has double sided 3/8" cutting head (reverse head to renew cutting teeth) amd 1/4" arbor with retracting pilot. |
|
$11.04
|
|
|
|
|
| • | 10 lb. slide weight designed for in-line impact. Balanced for continued use without fatigue. |
| • | Special hand-fit weight for ease of work. |
|
$129.02
|
|
|
|
|
| • | 10 lb. slide weight designed for in-line impact. Balanced for continued use without fatigue. |
| • | Special hand-fit weight for ease of work. |
|
$129.02
|
|
|
|
|
| • | Provides excellent balance with 5lb. slide weight on plated, solid, 5/8" shaft. Exclusive soft cushion vinyl grip with "Hang-It" hole absorbs shock. Broached ... |
|
$37.71
|
|
|
|
|
| • | The largest selling and most economical body shop dent puller in the industry. 3lb. slide weight is mounted on 12" plated steel shaft. Famous blue vinyl hand ... |
|
$20.91
|
|
|
|
|
| • | Extends life of all buffing pads and bonnets without removing them from the polisher. |
| • | Removes glazed surface and fluffs packed wool. |
|
$6.17
|
|
|
|
|
| • | The most popular body repair specialty tool. Combines all the contours and weight of a dolly with the reach and maneuverability of a spoon. Use for forming, p... |
|
$22.81
|
|
|
|
|
| • | Most popular body shop hammer. Designed to provide excellent balance for close-in work and finishing. Flat, round face, 1-1/4" diameter. Pencil point on 5-1/... |
|
$31.37
|
|
|
|
|
| • | This drop-forged steel hammer is a must for straight finishing and grooving jobs. Work on narrow fender beads with wedge shaped chisel cross peen. Round head ... |
|
$31.38
|
|
|
|
|
| • | Uses standard 3" x 8" sandpaper. Easy to affix paper to steel spikes molded into block. Holds paper securely. Use with wet or dry sandpaper on flat or curved... |
|
$6.86
|
|
|
|
|
| • | Same style as Cat. No. 89800, except uses standard 9" x 11" sandpaper cut in thirds. |
|
$10.69
|
|
|
|
|
| • | Urethane Supply Company's Mini-Weld Model 6 Airless Plastic Welder is the next generation in plastic welding technology. Some of the benefits of this new design... |
|
$174.08
|
|
|
