|
|
| • | 4.6 Amps, 2400 SPM |
| • | Burr-free edges - no finishing |
|
$445.63
|
|
|
|
|
| • | 5 Amps, 1000 SPM |
| • | Excellent for cutting high-alloy steel and stainless steel sheets |
|
$908.18
|
|
|
|
|
| • | 5 Amps, 1,700 SPM Cuts through tight corners Cuts through 16 gauge steel studs quickly |
| • | Punch is resharpenable - for extended life Ejects chips downward - away fr... |
|
$369.48
|
|
|
|
|
| • | Dependable, 3.0 Amp, all ball-bearing motor for long life |
| • | Round punch allows 360° pivot while cutting |
|
$326.72
|
|
|
|
|
| • | High output, 6.5 Amp, motor for long life in continuous-duty applications |
| • | 120° opening for cutting square and round corrugation |
|
$501.28
|
|
|
|
|
| • | High output, 6.5 Amp, motor for long life in continuous-duty applications |
| • | Round punch allows 360° pivot while cutting |
|
$471.79
|
|
|
|
|
| • | 14 ga. mild steel; 16 ga. Stainless |
| • | 90 psi |
|
$1,499.00
|
|
|
|
|
| • | 3/16 in. mild steel; 10 ga. Stainless |
| • | 120 volt |
|
$2,599.00
|
|
|
|
|
| • | 10 ga. mild steel; 12 ga. Stainless |
| • | 120 volt |
|
$1,624.00
|
|
|
|
|
| • | 1/4 in. mild steel; 3/16 in. stainless |
| • | 120 volt |
|
$2,599.00
|
|
|
|
|
| • | 18 ga. mild steel; 20 ga. Stainless |
| • | 90 psi |
|
$245.00
|
|
|
|
|
| • | 3/8 in. mild steel; 1/4 in. stainless |
| • | 120 volt |
|
$3,249.00
|
|
|
|
|
| • | Deals with any curves, ideal for notching sheet |
| • | For burr-and twist-free cutting, even thin sheet does not deform |
|
$585.00
|
|
|
|
|
| • | 4.0 amp, 1,000 SPM |
| • | Cuts up to 8.75 ft. per minute |
|
$893.66
$921.30
|
|
|
|
|
| • | 3.8 amp, 1,900 spm |
| • | Cuts up to 7 ft. per minute |
|
$522.20
$538.35
|
|
|