|
|
| • | Use with your feeler gauges to measure head, block, flywheel straightness (warpage) for every application from small engines up to heavy-duty diesels |
| • | Made from ... |
|
$68.56
|
|
|
|
|
| • | 8" long with 90 degree bend |
| • | Double pointed - one end straight; the other bent for removing "O" rings, seals, gaskets, etc. |
|
$7.95
|
|
|
|
|
| • | Seperate inch and metric scales |
| • | Dial indicator has fine line indicating hands |
|
$73.98
|
|
|
|
|
| • | ? Range: 0-6"/150mm.? Stainless steel frame.? Absolute/Incremental measurement.? Direct Inch/Metric conversion.? Accuracy: .001"/.02mm.? Resolution: .0005"/.01m... |
|
$67.54
|
|
|
|
|
| • | ? Range: 6"/150mm? Stainless steel frame.? Large easy-to-read display.? Resolution: .0005"? Absolute/incremental measurement.? Direct inch/metric conversion.? 4... |
|
$29.56
|
|
|
|
|
| • | ? Stainless steel construction? Silky smooth movement? .100" range per revolution? .001" reading dial face? Shockproof design? Comes with molded case. |
|
$30.80
|
|
|
|
|
| • | ? Dial graduation .001/.02mm? Dial face reads in both inch (black and metric (red).? Hardened stainless steel throughout.? Inside, outside and depth measurement... |
|
$36.67
|
|
|
|
|
| • | ? 12" blade graduated in 1/8", 1/16", 1/32", and 1/64"? Ruler blade is chrome plated for corrosion resistance.? Square head includes level? Square head is adjus... |
|
$38.46
|
|
|
|
|
| • | 28 piece Transfer Punch Set supplied with index stand to keep punches organized. |
| • | Punches are made of hardened and tempered tool steel, black oxide finished. |
|
$29.00
|
|
|
|
|
| • | ? Range: 0-6"/150mm? Direct inch/metric conversion? Accuracy: .001"/.02mm? Resolution: .0005"/.01mm? IP54 Oil, Water, and Dust Resistant? Includes fitted cas... |
|
$76.40
|
|
|
|
|
| • | ? Fractional Measurement? Easy-To-Read Display? Lightweight? Range 6"/150mm? Polycarbonate Frame? Large easy-to-read display? Resolution .001"/.01mm, fractions ... |
|
$14.74
|
|
|
|
|
| • | The mini-MAG Protractor provides instant 360? digital inclination display of any angle with the additional unique feature of embedded magnets on two sides which... |
|
$46.98
|
|
|
|
|
| • | 12" blade graduated in 1/8", 1/16", 1/32", and 1/64" |
| • | Ruler blade is chrome plated for corrosion resistance. |
|
$109.00
|
|
|
|
|
| • | Gauge measures clearances from 0.0015 to 0.035" (0.038 to 0.889mm). It also includes one 0.010" brass blade to use with electronic ignitions. Blade lengths: 3... |
|
$6.91
|
|
|
|
|
| • | Gauge measures clearances 0.002 to 0.025" (0.051 to 0.635mm). It includes a 2-1/2" rule and 15 blades. Blade lengths: 3-5/16" long |
|
$5.39
|
|
|
|
|
| • | 11-blade gauge measures valve tappet clearances from .008" to .026". Offset blades provide easy access. Blade Lengths: 3-3/4" long. |
|
$5.30
|
|
|
|
|
| • | Miniature 16-blade feeler gauges are only 1/4" wide and measure clearances from 0.010 to 0.035" (0.254 to 0.889mm). ? Blade lengths: 1-3/4" long |
|
$4.78
|
|
|
|
|
| • | 6-blade gauge measures clearance in electronic ignition systems where non-magnetic blades are required. These hard brass blades will not magnetize. Blade length... |
|
$3.52
|
|
|
|
|
| • | ? 25-blade gauge measures clearances from 0.04 to 1mm? Blade sizes:0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35,0.40, 0.45, 0.50, 0.55... |
|
$9.08
|
|
|
|
|
| • | Gauge checks clearance measurements with a 0.002" range. Stepped blades quickly indicate if clearance fails within the specified range. Twenty-two etched blades... |
|
$11.08
|
|
|
|
|
| • | Stainless steel fully hardened frame, satin chrome finish? Reading Single revolution dial graduated .001? Four measurements, inside, outside, depth & step? Cove... |
|
$29.33
|
|
|
|
|
| • | ? 6" capacity? Range 1/.01 Revolution |
|
$19.43
|
|
|
|
|
| • | ? Color coded Off, On/Zero and Inch/mm? Glass window over LCD is clearer and does not wear out? Stainless steel frame with hardened jaws, graduated scale? 4 way... |
|
$45.53
|
|
|
|
|
| • | LCD displays up to 5 digits. |
| • | 4 way measurement, inside, outside, depth and step. |
|
$42.18
|
|
|
|
|
| • | ? Manual power on/off? With data output interface? .001", .1mm |
|
$37.93
|
|
|
|
|
| • | ? 15 Steel Blades? One 2" Steel Rule? Precision blades ensure accurate measurements? Blades are approximately 1/2" wide by 3 1/2" long |
|
$6.06
|
|
|
|
|
| • | ? 16 Steel Blades? Precision blades ensure accurate measurements ? Blades from .010" to .035" (.254 - .889mm) are approximately 1/4" wide by 1 3/4" long |
|
$5.09
|
|
|
|
|
| • | ? 11 Offset Steel Blades? Precision blades are offset at the proper angle for adjustment of valve tappets? Blades are approximately 1/2" wide by 4" long |
|
$5.62
|
|
|
|
|
| • | ? 31 Blades. 1 Brass Blade .010"? Precision blades ensure accurate measurements ? Blades from .0015" to .035" (.038 - .889mm) thickness are approximately 1/2" w... |
|
$7.92
|
|
|
|
|
| • | Satin-finished chrome frame, tapered (on the anvil side) for hard-to-reach places |
| • | Carbide-tipped measuring faces |
|
$132.03
|
|
|
|
|
| • | Carbide faces |
| • | Positive locking clamp |
|
$98.08
|
|
|
|
|
| • | Carbide faces |
| • | Positive locking clamp |
|
$114.11
|
|
|
|
|
| • | Carbide faces |
| • | Positive locking clamp |
|
$118.83
|
|
|
|
|
| • | Carbide faces |
| • | Positive locking clamp |
|
$383.82
|
|
|
|
|
| • | Useful in measuring the wall thickness of small parts such as sleeves, collars, tubings and various cylindrical workpieces |
| • | Used to measure dimensions from the in... |
|
$109.39
|
|
|
|
|
| • | Anvil and the spindle have a blade for measuring the groove diameter of shafts, keyways, and other hard-to-reach portions |
| • | Non-rotating spindle |
|
$257.45
|
|
|
|
|
| • | Ratchet stop for consistent and repetitive measurements |
| • | .157" dia. interchangeable rods, with lapped measuring end, are calibrated and tested at the factory |
|
$152.78
|
|
|
|
|
| • | Ratchet stop for consistent and repetitive measurements |
| • | .157" dia. interchangeable rods, with lapped measuring end, are calibrated and tested at the factory |
|
$198.04
|
|
|
|
|
| • | Ratchet stop for consistent and repetitive measurements |
| • | .157" dia. interchangeable rods, with lapped measuring end, are calibrated and tested at the factory |
|
$340.44
|
|
|
|
|
| • | Extra large LCD |
| • | Two measuring modes - ABS (absolute) and INC (incremental) - for efficient measurement |
|
$144.29
|
|
|