|
|
| • | Width=4 1/4 in, Length=4 1/4 in, Load Cap.=220 lb, Height=5 1/2 in |
| • | Contains powerful Alcomax magnetic material |
|
$582.93
|
|
|
|
|
| • | Length=5 3/4 in [Min], 26 in [Max] |
| • | Ideal for retrieving ferrous objects that are out of reach |
|
$7.94
|
|
|
|
|
| • | Width=3 in, Length=5.900 in, Height=2.400 in, Flat Section SWL=275.000 lb, Flat Section Thickness=0.800 in [Min], Flat Section Length=60.000 in [Max], Round Sec... |
|
$500.11
|
|
|
|
|
| • | Width=3 1/2 in, Length=8.300 in, Height=2.800 in, Flat Section SWL=275.000 lb, Flat Section Thickness=0.800 in [Min], Flat Section Length=60.000 in [Max], Round... |
|
$794.73
|
|
|
|
|
| • | Width=4.200 in, Length=11.100 in, Height=3 1/2 in, Flat Section SWL=275.000 lb, Flat Section Thickness=0.800 in [Min], Flat Section Length=80.000 in [Max], Roun... |
|
$1,051.93
|
|
|
|
|
| • | Width=5.400 in, Length=15.400 in, Height=4.100 in, Flat Section SWL=275.000 lb, Flat Section Thickness=0.800 in [Min], Flat Section Length=120.000 in [Max], Rou... |
|
$1,708.73
|
|
|
|
|
| • | Width=7.300 in, Length=19 in, Height=5.200 in, Flat Section SWL=275.000 lb, Flat Section Thickness=0.800 in [Min], Flat Section Length=... |
| • | Free Ground Shipping |
|
$2,754.59
|
|
|
|
|
| • | Load Cap.=25 lb, Dia.=1 1/4 in, Height=3/4 in, Material=Alcomax lll, Hole Diam=1/4 in, Temp. Range=212.0 ?F [Max] |
| • | Commonly used in synchronous motors, dynamos, a... |
|
$14.78
|
|
|
|
|
| • | Load Cap.=16 lb, Dia.=1 in, Height=3/4 in, Material=Alcomax lll, Hole Diam=1/4 in, Temp. Range=212.0 ?F [Max] |
| • | Commonly used in synchronous motors, dynamos, air t... |
|
$10.94
|
|
|
|
|
| • | Load Cap.=4 lb, Dia.=3/4 in, Height=1/2 in, Material=Alcomax lll, Hole Diam=0.218 in, Temp. Range=212.0 ?F [Max] |
| • | Commonly used in synchronous motors, dynamos, ai... |
|
$6.83
|
|
|
|
|
| • | Load Cap.=1/4 lb, Dia.=1/4 in, Height=1/2 in, Material=Alcomax lll, Thread - TPI or Pitch=6 - 32, Temp. Range=428.0 ?F [Max] |
| • | Commonly used in gripping/lifting, p... |
|
$8.65
|
|
|
|
|
| • | Load Cap.=1.430 lb, Dia.=3/8 in, Height=1/2 in, Material=Alcomax lll, Thread - TPI or Pitch=6 - 32, Temp. Range=428.0 ?F [Max] |
| • | Commonly used in gripping/lifting,... |
|
$8.65
|
|
|
|
|
| • | Load Cap.=2 1/2 lb, Dia.=1/2 in, Height=1/2 in, Material=Alcomax lll, Thread - TPI or Pitch=6 - 32, Temp. Range=428.0 ?F [Max] |
| • | Commonly used in gripping/lifting,... |
|
$8.16
|
|
|
|
|
| • | Load Cap.=9.130 lb, Dia.=3/4 in, Height=3/4 in, Material=Alcomax lll, Thread - TPI or Pitch=10 - 24, Temp. Range=428.0 ?F [Max] |
| • | Commonly used in gripping/lifting... |
|
$9.37
|
|
|
|
|
| • | Load Cap.=16 lb, Dia.=1 in, Height=1 in, Material=Alcomax lll, Thread - TPI or Pitch=1/4 - 20, Temp. Range=428.0 ?F [Max] |
| • | Commonly used in gripping/lifting, posi... |
|
$12.52
|
|
|
|
|
| • | Dia.=1/4 in, Thickness=1/4 in, Temp. Range=-40.0 ?F [Min], 300.0 ?F [Max] |
| • | Pressure-formed (sintered) magnets have ten times the strength of alnico magnets |
|
$0.95
|
|
|
|
|
| • | Dia.=1/4 in, Thickness=1/2 in, Temp. Range=-40.0 ?F [Min], 300.0 ?F [Max] |
| • | Pressure-formed (sintered) magnets have ten times the strength of alnico magnets |
|
$1.95
|
|
|
|
|
| • | Dia.=3/8 in, Thickness=1/4 in, Temp. Range=-40.0 ?F [Min], 300.0 ?F [Max] |
| • | Pressure-formed (sintered) magnets have ten times the strength of alnico magnets |
|
$1.22
|
|
|
|
|
| • | Dia.=3/8 in, Thickness=1/2 in, Temp. Range=-40.0 ?F [Min], 300.0 ?F [Max] |
| • | Pressure-formed (sintered) magnets have ten times the strength of alnico magnets |
|
$1.74
|
|
|
|
|
| • | Dia.=1/2 in, Thickness=1/4 in, Temp. Range=-40.0 ?F [Min], 300.0 ?F [Max] |
| • | Pressure-formed (sintered) magnets have ten times the strength of alnico magnets |
|
$2.84
|
|
|
|
|
| • | Dia.=1/2 in, Thickness=1/2 in, Temp. Range=-40.0 ?F [Min], 300.0 ?F [Max] |
| • | Pressure-formed (sintered) magnets have ten times the strength of alnico magnets |
|
$4.28
|
|
|
|
|
| • | Dia.=3/4 in, Thickness=3/8 in, Temp. Range=-40.0 ?F [Min], 300.0 ?F [Max] |
| • | Pressure-formed (sintered) magnets have ten times the strength of alnico magnets |
|
$9.02
|
|
|
|
|
| • | Dia.=1 in, Thickness=1/4 in, Temp. Range=-40.0 ?F [Min], 300.0 ?F [Max] |
| • | Pressure-formed (sintered) magnets have ten times the strength of alnico magnets |
|
$3.90
|
|
|
|
|
| • | Dia.=1 in, Thickness=1/2 in, Temp. Range=-40.0 ?F [Min], 300.0 ?F [Max] |
| • | Pressure-formed (sintered) magnets have ten times the strength of alnico magnets |
|
$6.90
|
|
|
|
|
| • | Width=4 in, Length=8 in, Height=3 in, Flat Section SWL=330.000 lb, Flat Section Thickness=0.300 in [Min], Flat Section Length=60.000 in [Max], Round Section SWL... |
|
$612.50
|
|
|
|
|
| • | Width=4 in, Length=14 in, Height=3 in, Flat Section SWL=660.000 lb, Flat Section Thickness=0.300 in [Min], Flat Section Length=80.000 in [Max], Round Section SW... |
|
$975.62
|
|
|
|
|
| • | Width=6.900 in, Length=14.100 in, Height=6.900 in, Flat Section SWL=2200.000 lb, Flat Section Thickness=1.770 in [Min], Flat Section Le... |
| • | Free Ground Shipping |
|
$2,489.09
|
|
|
|
|
| • | Width=9.200 in, Length=18.800 in, Height=8.900 in, Flat Section SWL=4400.000 lb, Flat Section Thickness=2.170 in [Min], Flat Section Le... |
| • | Free Ground Shipping |
|
$4,410.00
|
|
|
|
|
| • | Width=2 in, Length=2 in, Load Cap.=40 lb [Max], Height=1 1/8 in, Type=Magnetize/Demagnetize |
| • | Greater control of magnetic strength |
|
$3.41
|
|
|
|
|
| • | Width=1/2 in, Length=10 in, Material=Magnet, Thickness=1/16 in, Type=Magnetic Strip, Mounting=Adhesive Pad |
| • | Flexible magnetic strip with adhesive backing adheres ... |
|
$6.71
|
|
|
|
|
| • | Width=3 in, Load Cap.=50 lb [Max], Height=2 1/2 in, Material=Magnet, Hole Size=3/16 in, Type=Alnico Magnet, Shape=Horse Shoe, Wt.=16 oz |
| • | Strong magnetic pull |
|
$75.32
|
|
|
|
|
| • | Width=1 1/8 in, Load Cap.=13 lb [Max], Height=3/4 in, Material=Magnet, Hole Size=3/16 in, Type=Alnico Magnet, Shape=Horse Shoe, Wt.=2 oz |
| • | Strong magnetic pull |
|
$11.14
|
|
|
|
|
| • | Width=1 1/2 in, Load Cap.=22 lb [Max], Height=1 in, Material=Magnet, Hole Size=3/16 in, Type=Alnico Magnet, Shape=Horse Shoe, Wt.=4 oz |
| • | Strong magnetic pull |
|
$16.55
|
|
|
|
|
| • | Width=1 3/4 in, Load Cap.=30 lb [Max], Height=1 1/8 in, Material=Magnet, Hole Size=3/16 in, Type=Alnico Magnet, Shape=Horse Shoe, Wt.=6 oz |
| • | Strong magnetic pull |
|
$22.07
|
|
|
|
|
| • | Load Cap.=10 lb [Max], Dia.=13/16 in, Height=3/4 in, Material=Magnet, Thread - TPI or Pitch=1/4 in - 20 UNC, Type=Alnico Magnet, Shape=Cylinder, Wt.=6 oz |
| • | Strong ... |
|
$10.25
|
|
|
|
|
| • | Load Cap.=35 lb [Max], Dia.=1 3/8 in, Height=1 3/16 in, Material=Magnet, Thread - TPI or Pitch=1/4 in - 20 UNC, Type=Alnico Magnet, Shape=Cylinder, Wt.=24 oz |
| • | Str... |
|
$19.23
|
|
|
|
|
| • | Load Cap.=12 lb [Max], Dia.=1 3/8 in, Height=3/16 in, Material=Ceramic Magnet, Hole Size=3/16 in, Type=Ceramic Magnet, Shape=Round |
|
$3.99
|
|
|
|
|
| • | Load Cap.=20 lb [Max], Dia.=2 in, Height=1/4 in, Material=Ceramic Magnet, Hole Size=3/16 in, Type=Ceramic Magnet, Shape=Round |
|
$4.97
|
|
|
|
|
| • | Load Cap.=35 lb [Max], Dia.=2 5/8 in, Height=3/8 in, Material=Ceramic Magnet, Hole Size=9/32 in, Type=Ceramic Magnet, Shape=Round |
|
$6.35
|
|
|
|
|
| • | Load Cap.=50 lb [Max], Dia.=3 1/4 in, Height=7/16 in, Material=Ceramic Magnet, Hole Size=9/32 in, Type=Ceramic Magnet, Shape=Round |
|
$8.09
|
|
|
