Product is brand new.
Features:
| • | 3/4 inch capacity, 12.5 amp motor, 350 RPM |
| • | Solid state electronic switching |
| • | Feedback speed control |
| • | Line Lock-Out prevents tool from operating should voltage be restored to an interrupted line |
| • | Variable Speed from 0-350 |
| • | Chuck Capacity 3/16 - 51/64 |
|
|
This combination unit features the 4203 adjustable position, variable speed base and the 4262-1 3/4 in. drill motor. All you need is a bit and you are ready to drill into any ferrous material 1/2 in. and thicker. Includes 4203 base and 4262-1 motor.
Voltage 120 AC
Amps 12.5
Drill Capacity 3/4 in
No Load Speed 350 RPM
Cord Type 9 ft. Fixed
Construction Type Grounded
Electronic Feedback Yes
Tap Capacity 1 in.-14
Drill Point Pressure 1,630/1,670 lbs.
Adjustable Base Yes
Drill Travel 11 in.
Chuck or Taper Chuck
Tool Weight 70.0 lbs.
|
|
Standard UPS and Fedex transit times:
| Ground |
2-7 business
days depends on location |
| Third day
air |
3 business
days |
| Second day
air |
2 business
days |
| *Next day
air (please call) |
1 business
day |
*Upon customer request only.
*Please note 2nd and 3rd day air cutoff times for shipping is 12pm est.
Truck Deliveries
Most of our trucking carriers offer Curb Side Delivery
to customers location. Curbed Side Delivery means it is the responsibility of
the customer who is receiving the shipment to have the means to unload by (fork
lift or loading dock)
Please note larger items that have free shipping on ground delivery (Cement
Mixers, Panel saws, log splitters) Toolfetch pays the shipping to a commercial/business
address assuming the location has a fork lift, loading dock or man power to
remove the product off the truck. Toolfetch does not pay for Residential fees
or lift gate service, this is responsibility of the customer. One of our shipping
personal will contact you prior to processing your order with (Residential fees,
or liftgate fee if required).
Toolfetch offers different options for truck deliveries:
Commercial/Business Address:
If Toolfetch ships to a commercial address (assuming
customer has a forklift or loading dock) Toolfetch will pay the shipping.
If liftgate service is required additional fees will be added depending on
the freight carrier. A Toolfetch shipping representative will contact you
and ask you if you need this additional service. Toolfetch is not responsible
if the product cannot be unloaded off the truck. Truck drivers are not deemed
responsible to help unload the product off the truck. Please note if you operate
your business out of residential address you will be charged for the additional
costs of delivering to a residential address
Residential address:
(Larger Items such as Cement Mixers, Panel Saws, Generators
etc..)
Trucking carriers impose additional shipping costs to a residential address.
The additional fee is due to shipping carriers not being able to use 18
wheelers down residential streets and need to switch to smaller trucks.
Toolfetch is not responsible for additional shipping costs to a residential
address.
Additional costs for residential delivery can range from $30-65 depending
on shipping carriers.. Larger items that are heavy over 70 lb. customers
should request lift gate service. Liftgate service charges can range from
$40 - 100 depending on carrier. A Toolfetch representative will call prior
to processing the order and discuss these additional costs
If the customer does not request lift gate service Toolfetch is not responsible
if the product cannot be removed from the truck. Please note truck drivers
are not deemed responsible to help unload the product off the truck .If
the driver or customer cannot unload the product it will be brought back
to the shipping depot. The customer is responsible for making a 2nd delivery
attempt and will be charged accordingly
Pickup from Terminal:
An alternative to shipping to a residential or commercial/business
address is shipping the unit to a shipping terminal. If the customer requests
to ship to a terminal we can make arrangements with our shipping carriers
for the customer to pickup the unit from the terminal. Toolfetch will determine
the closest terminal to the customers location prior to processing the order.
Please note you must bring proper identification to the terminal.
Products that have the icon free shipping
on ground deliveries:
Items under 70 lb. (lasers,
carts, powertools, buckets, etc...) that have free shipping on ground
delivery will be shipped regular UPS ground or FedEx Ground.
Items over 70 Ib. (Cement Mixers, Log Splitters,
Generators, kettles, rail saws etc...) that have free shipping on
ground delivery will be shipped by freight truck. Please note these items
can only ship ground service. Toolfetch has free shipping to commercial/business
addresses assuming the location has a loading dock or fork lift present
to remove the item off the truck. Toolfetch does not pay for additional
residential fees or lift gate service (please see residential
address section for additional costs). These additional costs are the
responsibility of the customer. A Toolfetch representative will call prior
to processing the order and ask if the customer is shipping the product
to a residential address or commercial address and if you require lift gate
service.
UPS and FedEx:
Most items under 70 pounds ship by UPS or FedEx
Please note UPS and FedEx cannot ship to a PO Box.
If shipping to Hawaii or Alaska the shipment will be mailed Second day air
only
Back Orders:
If an item is purchased from Toolfetch that is backordered
you will be notified via email immediately. We will keep you updated on the
backorder status of the product or we will offer substitute products if the
product cannot ship in a timely fashion.
International Shipping:
If you are shipping outside of the United States please see our international shipping
page for shipping quotes and payment information. Please click here for our international shipping page
Canadian Shipping:
If you are shipping to Canada please see our Canadian international shipping
page for shipping quotes and payment information. Please click here for our Canadian international shipping page
|
The Lease Procedure
At NuCorp Financial Services, we make leasing as easy as 1-2-3! Most applicants
can be approved up to $75,000.00 with a simple one-page application.
Step 1
Client expresses interest in leasing the equipment from the equipment vendor.
Client completes the NuCorp Financial Services Equipment Application and returns
it to NuCorp via fax or email.
Step 2
Lease Consultant processes the application and calls the client to go over the
terms of the approval. Upon a verbal agreement on terms, a lease proposal is
sent to client. Once lease proposal is returned, the lease documents are prepared
and sent out to client.
Step 3
Client sends back the lease documents and NuCorp reviews the documents and completes
verbal verification. Once verbal is completed, the lease is funded and commenced.
A check is sent out overnight to the equipment vendor.
Download the Nucorp Equipment Lease Application here
What Are The Benefits of Leasing?
Leasing Conserves Capital. Leasing eases the strain on working capital
by providing 100% financing. This means that your client has more money available
to invest in profit generating activities. It converts a large cash sale price
into a low, affordable, tax-deductible monthly payment. Rather than tying up
their bank line of credit or using cash operating funds, leasing allows an additional
source of capital for equipment. Taxes, delivery, service contracts and other
soft costs not typically financed by a bank can also be included in the cost
of the lease.
Tax Benefits. Lease rental payments are made from pre-tax rather than
after-tax earnings. Lease payments may be fully deductible, consult an accountant.
The cost of leasing is an operating expense, and is therefore tax deductible
for the life of the lease. This is usually shorter than the normally allowable
depreciation schedule. In most cases, tax benefits of a lease transaction are
more beneficial to a company than an outright purchase.
Fixed Rate Lease Payments. No variable interest rates here. Fixed payments
enable a lessee to more accurately predict equipment costs and cash needs.
Avoid Obsolescence. Buying promotes keeping equipment far beyond its
useful life. Out-dated equipment is often shuttled downstream or stored away
until it is less than worthless (sold for less than the costs of selling). Equipment
leasing protects your clients company from having to keep obsolete equipment.
Trade-in, add-on and upgrade capabilities allow your clients to make the needed
adjustments as your business grows.
About NuCorp
Established in 1998, NuCorp, Inc. has been assisting entrepenuers and business owners with financing options for over a decade. As lease consultants, we advise our clients on the ideal options for their business. The world of business is complicated and unpredictable. NuCorp Financial Services is dedicated to leveraging that playing field. We have strong relationships with some of the world's largest financial institutions. We have also built partnerships with specialized vendors to bring our clients quality, reliable equipment.
NuCorp Financial Services specializes in leasing commercial equipment from $1000.00 to $250,000.00. We understand the benefits of reserving capital and provide answers and a resource for all types of businesses. By offering every available funding resource, flexible payment programs, and including our own warehouse line to our clients, we can provide the leasing resource our clients need
NuCorp Financial Services specializes in leasing commercial equipment from $1000.00 to $250,000.00. We understand the benefits of reserving capital and provide answers and a resource for all types of businesses. By offering every available funding resource, flexible payment programs, and including our own warehouse line to our clients, we can provide the leasing resource our clients need
Contact Information
Please call our professional leasing/Financing agent Jesse Zuckerman for any questions
949-273-6383 Ext. 119
|
|
|
Magnetic Drill Help
There are a few attributes of magnetic drills to consider before purchasing
one.
Hole Size: what diameter hole will you be cutting today and in the future.
Most customers are drilling 1" diameter holes and smaller which will put you
into a smaller and lighter drill. Some drills in this category are Jancy Holemaker,
Jm101 and Magforce, Milwaukee offers their 4270-21.
Larger diameters or depths of cuts will need more powerful drills. Be careful
when choosing larger drills the weights of these machines increase sharply.
Some drills in this area are the Jancy USA5, 2x2, 4x4 or the Fein KBM-52U and
Milwaukee 4208-1 and 4209-1.
Chuck Adapter: if you already have twist drill bits, are making holes
smaller than 7/16" or need to drill a blind hole then you need a chuck adapter,
these are accessories on these drills. Most of our drills will accept chucks
except the Jancy Magforce.
Cutting Fluid: Buy cutting fluid, either locally or through Toolfetch
it will extend the life of your cutters. If you are drilling horizontally or
upside-down we carry a special paste called Tapmatic Edge Cream which will stick
to the area being cut and melt with friction.
Pilot Pins: Pins are not mandatory but they help with centering your
cut and ejecting a solid slug after cutting through material, there are different
pins for different sized cutters
Annular Cutters: Cutters come in a variety of sizes and styles. The
most common cutters purchased are the high speed cutters. These cutters can
be resharpened 5-6 times depending on wear. Carbide tipped cutters are a less
expensive cutter to purchase but can only be resharpened once (or in some cases
not at all). Depending on your application we offer special cutters for unique
situations ie: cutting pipe requires a PG cutter or cutting pipe through both
sides need a PGID cutter. If your cutting through 2 separate plates at once
you need an ID cutter.
Below is a list of the different style cutters offered, if you need help or
need to order a special cutter call our toll free number at 800-508-4735 and
a sales representative will assist you.
Annular Cutter Definitions
High Speed Steel (HSS) Cutters (M2)
High Speed Steel is the standard material used to manufacture Slugger cutters.
Unless otherwise specified on the order, cutters are packaged as HSS.
Titanium Nitride (TINI) Cutters
TINI coatings improve tool life by increasing surface hardness of the tool
and providing greater lubricity. TINI coated cutters are generally used in applications
where the material being cut is difficult to machine, or when extended tool
life is desired. To order, add the suffix "TN" after part number or set number.
Titanium Carbonitride (TICN) Cutters
TICN coated cutters are practical when drilling highly abrasive or gummy materials
such as brass and aluminum alloys. To order, add the suffix "TC" after part
number or set number.
M42 Cobalt Steel Cutters
Cobalt cutters are effective when drilling material with inconsistent composition.
They are also valuable when increased feed rates are necessary and extending
tool life between sharpening is desirable. To order, add the suffix "C" after
part number or set number.
ID Sharpened Cutters
For Stack Drilling ID-style cutters are convenient when drilling through multiple
layers. To order, add the suffix "ID" after part number or set number.
Pipe-Style Geometry Cutters
For Pipe and Tube Drilling Applications Cutters with pipe-style geometry are
advantageous when drilling holes on curved or uneven surfaces. When ordering
cutters 1-1/4" and larger, add the suffix "PG" after part number or set number.
(Cutters smaller than this are manufactured standard with pipe-style geometry
Truck Frame Cutters
Cutters for Truck Frame Drilling Truck frames are manufactured to retain extraordinary
strength and durability. Consequently, frame materials are more difficult to
drill. An effective way to combat this problem is to use an ID-style cutter
that is also TINI coated. Combined, the resulting cutter simultaneously permits
continuous drilling through layers while enhancing cutting performance and extending
tool life. To order, add the suffix "IDTN" after part number or set number.
Rail Cutters
Specifically designed for rail drilling. Its unique design and specially developed
coating allow for faster drilling and longer life, even in the toughest rail.
|
|
Every MILWAUKEE product is warranted to the original purchaser only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on a product which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of five (5) years* after the date of purchase. Return the product and a copy of proof of purchase to a MILWAUKEE factory Service Center location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
*Every MILWAUKEE V™-technology LITHIUM-ION Battery Pack and XC LITHIUM-ION Battery Pack is warranted for five (5) years / 2000 charges from the date of purchase, whichever first occurs. The first 1000 charges or 2 years of the warranty, whichever first occurs, are covered through free replacement of the defective battery. This means that for the earlier of the first 1000 charges or two (2) years from the date of purchase/first charge, a replacement battery will be provided to the customer for any defective battery free of charge. Thereafter, the remaining charges up to a total of 2000 or the remainder of the five (5) year period from the date of purchase, whichever first occurs, will be covered on a pro rata basis. This means that every customer gets an additional 1000 charges or three (3) years of pro rata warranty on the V™-technology LITHIUM-ION Battery Pack and XC LITHIUM-ION Battery Pack depending upon the amount of use.
*The warranty period for ALL non V™-technology and non XC LITHIUM-ION battery packs is two (2) years from the date of purchase.
*The warranty period for Portable Generators is two (2) years from the date of purchase.
*The warranty period for all Ni-CD Battery Packs, Work Lights (cordless flashlights), Job Site Radios, Trade Titan™ Industrial Work Carts and Hoists (lever, hand chain, & electric chain hoists) is one (1) year from the date of purchase.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The manufacturing date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
Normal Wear: air nailers – staplers, like all power tools, these products need periodic parts replacement and service to achieve best performance. This warranty does not cover repair when normal use has exhausted the life of a part including, but not limited to, o-rings, seals, bumpers and driver blades.
MILWAUKEE does not cover freight or labor charges associated with the inspection and testing of portable generators or hoists (lever, hand chain & electric chain hoists) that are found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
*Gasoline Engine - Warranty: The gasoline engine on a portable generator is separately warranted by the engine manufacturer and is serviced through the engine manufacturer’s authorized service center network. MILWAUKEE is not authorized and has no responsibility for warranty service of any nature whatsoever for a gasoline engine. If requested, MILWAUKEE will help you locate your nearest service facility for a gasoline engine.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to product sold in the U.S.A., Canada and Mexico only.
Please consult the "Service Center Search" in the Parts & Service section of MILWAUKEE’s website www.milwaukeetool.com or call 1.800.SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service on a Milwaukee product.
|
|
