|
|
| • | Set allows servicing of different areas of repair that require a specialty tool due to their confined locations |
| • | Mercedes-Benz Fan Clutch Wrench allows removal ... |
|
$103.19
|
|
|
|
|
| • | Tool can be used to aid in the removal and installation of the crank bolt used on most Chrysler, Hyundai, Mazda, and GM engines. |
| • | Aids in the removal of the har... |
|
$61.67
|
|
|
|
|
| • | Removes and installs press-on-type belt drive accessory pulleys. |
| • | Interchangeable components to work on GM Quad 4, GM 3.1L, and Ford 4.6L |
|
$59.84
|
|
|
|
|
| • | The Serpentine Belt Wrenches are designed to release the tension on spring-loaded idler pulleys. This wrench allows direct access to the tensioner without havi... |
|
$70.20
|
|
|
|
|
| • | Puller removes balancers, pulleys and gears with taped holes. A floating swivel prevents damage to the shaft end. Four slots in the yoke allow for 2- or 3-hol... |
|
$17.78
|
|
|
|
|
| • | Remove pressed-on alternator and power steering pulleys on late-model GM, Ford and Chrysler engines. The threaded end installs late-model GM alternator and pow... |
|
$44.68
|
|
|
|
|
| • | Tool is used to release tension on Serpentine Belt Self-Adjusting Idler Pulley. Just push or pull to release tension. Exclusive Crow Foot wrenches provide maxim... |
|
$34.11
|
|
|
|
|
| • | 100% coverage of all vehicles including the 3/4 Volvo |
| • | Ratcheting GearForce technology provides exceptional access and ease of use |
|
$58.87
|
|
|
|
|
|
$18.90
|
|
|
|
|
| • | This versatile kit covers most vehicles with bolt or pulleys and also newer Chrysler engines with press on pulleys requiring special pins to hold housing. |
| • | Feat... |
|
$74.49
|
|
|
|
|
| • | Loosen or tighten cylindrical, rectangular and odd shaped objects. Handy, self-tightening strap wrench won't slip. Works great for installing or removing timing... |
|
$17.40
|
|
|
|
|
| • | ? Removes and Installs Pressed on Power Steering, Alternator and Air Pump Pulleys.? Makes removing pressed on pulleys an easy job? This puller will remove and i... |
|
$47.30
|
|
|
|
|
| • | The 45300 is equipped with the special bolts and adapters to pull the harmonic balancer cleanly without damage to the crank sensor |
| • | Order the 45350 Retrofit Kit t... |
|
$27.80
|
|
|
|
|
| • | Designed to ease the operation of pulling the balancer pulley. It reduces damage to both the pulley and the shaft. Includes: (3) M8x1.25x80 bolts, (2) 3/*-16x3"... |
|
$21.00
|
|
|
|
|
| • | The low profile design enables work in confined areas |
| • | Eliminates the need to remove the radiator to access the pulley |
|
$65.57
|
|
|
|
|
| • | This Kit Features The Puller Hardware And Special Pulling Screws To Remove Most All Automotive Harmonic Balancers. |
| • | The kit includes a standard harmonic balance... |
|
$88.83
|
|
|
|
|
| • | Releases Tension on Serpentine Belts with a Spring Loaded Idler Pulley.Used to remove and install belts on serpentine belt systems using a spring loaded idler ... |
|
$43.96
|
|
|
|
|
| • | ? Releases tension on serpentine belts with a spring loaded idler pulley.? This tool is used to remove and install belts on serpentine belt systems using the sp... |
|
$40.42
|
|
|
|
|
| • | A complete set of tools required to remove and install power steering pump pulleys of most domestic vehicles. |
| • | Fits pulley hubs with diameters of 1- 1/8", 1-1/... |
|
$46.90
|
|
|
|
|
| • | Tool allows the technician to hold the crankshaft damper when tightening or loosening the crankshaft bolt. |
| • | Works on the following Honda and Acura engines: 199... |
|
$38.23
|
|
|
|
|
| • | Pulls harmonic balancers, timing gears and parts having two or three taped holes. Slotted holes in puller body permit cap screws to be positioned to handle bol... |
|
$33.54
|
|
|
|
|
| • | Improved With More ApplicationsDesigned for removing damper pulleys in tight engine compartments without removing the radiator. |
| • | GM 2000 Generation III 4.8L, 5.3... |
|
$68.77
|
|
|
|
|
| • | This unique tool has been developed to aid in the removal and installation of the crank bolt on most Honda and Acura engines. It has been re-engineered to work... |
|
$37.70
|
|
|
|
|
| • | This low profile puller has been designed for use on the following automobiles, SUV's, vans and pickups: |
| • | Chrysler 1990 & later vans with 3.3L V-6 |
|
$78.15
|
|
|
|
|
| • | This unique tool has been developed to aid in the removal and installation of the crank bolt on most Chrysler engines. In operation this tool holds the harmonic... |
|
$37.37
|
|
|