|
|
| • | A powerful, yet economical, fast cutting action zip gun |
| • | Designed for muffler and pipe removal, body shop and shock work, scraping rust and light front-end work |
|
$45.57
|
|
|
|
|
| • | Kit includes CP7110 air hammer plus a quick change retainer and four chisels packed in a heavy duty carrying case.Product Specifications: |
| • | Shank Opening (in.) .4... |
|
$93.23
|
|
|
|
|
| • | Most controllable CP Hammer available. |
| • | Ideal for complete body shop work. |
|
$302.70
|
|
|
|
|
| • | Most powerful hammer in its class |
| • | Longer piston strokes for more force per blow |
|
$65.90
|
|
|
|
|
| • | Most powerful CP Hammer for automotive, truck, off-road equipment use. |
| • | .498" diameter chisel shank to handle the wxtra power. |
|
$527.41
|
|
|
|
|
|
$11.17
|
|
|
|
|
|
$9.09
|
|
|
|
|
| • | High quality steel with black oxide finish. |
| • | Includes: Rivet Cutter, Bushing Splitter, 3/4" Flat Chisel, Muffler Cutter, Straight Punch, Tappered Punch, Nut Spl... |
|
$53.35
|
|
|
|
|
| • | Set contains the most popular .498 shank chisels for heavy duty service work. |
| • | 7 Piece Set contains: 5/8" Flat Chisel, Tapered Punch, Straight Punch, Dual Blade... |
|
$62.35
|
|
|
|
|
| • | The economical air hammer for fast cutting action especially for medium exhaust work, panel cutting, and general repair work |
| • | Up to 3,500 blows per minute |
|
$56.84
|
|
|
|
|
| • | An economical air hammer with a long piston stroke, this tool is designed for exhaust work, bolt cutting, and front end work. The trigger control and a built i... |
|
$58.29
|
|
|
|
|
| • | An economical air hammer with a long piston stroke, this tool is designed for exhaust work, bolt cutting, and front end work. The trigger control and a built i... |
|
$64.66
|
|
|
|
|
| • | Make fast work of body panel crimping and cutting, bushing, driving, shearing and general front end work with this air hammer, a super duty tool that produces u... |
|
$98.50
|
|
|
|
|
| • | Super Duty Air HammerMake fast work of body panel crimping and cutting, bushing, driving, shearing and general front end work with this air hammer, a super duty... |
|
$89.38
|
|
|
|
|
| • | Designed for use with .401 shank pneumatic impact hammers. |
| • | No more bruised hands and fingers. |
|
$19.91
|
|
|
|
|
| • | ? This tool has the exclusive Oldforge CURL-CUT? Leaves a clean, smooth edge with the cut curling up through the slot in the middle? Length: 6"? Stock: 1/2"? We... |
|
$12.64
|
|
|
|
|
| • | ? This tool has the exclusive Oldforge CURL-CUT? Designed to separate telescoped tubing without damage to the inner section? Length: 8"? Stock: 1/2"? Weight: .4... |
|
$10.23
|
|
|
|
|
| • | ? Designed to cut bolts, nuts tees, angles and frame members? Blade width: 5/8"? Length: 10-1/2"? Stock: 1/2"? Weight: .58 lbs |
|
$11.18
|
|
|
|
|
| • | ? Removes gaskets, rust, undercoating, paint, floor tile, plaster and roofcoatings with ease? The blade is offset for hand clearance? Blade width: 1-1/8"? Lengt... |
|
$9.90
|
|
|
|
|
| • | ? Use for peening and crimping bodies, driving rivets and hinge pins? 3/8" tip? Length: 6"? Stock: 1/2" ? Weight: .35 lbs. |
|
$9.02
|
|
|
|
|
| • | ? Excellent for hammering operations such as U-joints, ball joint and body forming work.? 1" x 3.5" |
|
$11.58
|
|
|
|
|
| • | ? Designed to cut bolts, nuts, tees, angles, and frame members. ? Blade width is 5/8". |
|
$19.14
|
|
|
|
|
| • | ? Blade width: 1" ? Length: 13"? Weight: .29 lbs. |
|
$7.87
|
|
|
|
|
| • | ? A complete assortment of pneumatic tools to handle many different problems encountered by the technician.? Set includes: 31955 Body Ripper, 31957 Panel Cutter... |
|
$70.17
|
|
|
|
|
| • | ? Extra long body for those hard-to-reach areas? Includes - Long Scraper, Long Taper Punch, and Sharp Point Long Taper Punch, Flat Tip? Weight: 2.9 lbs |
|
$49.89
|
|
|
|
|
| • | 3,000 blows per minute at 90 PSI |
| • | Heat-treated impact parts for durability |
|
$46.62
|
|
|
|
|
|
$10.23
|
|
|
|
|
|
$22.62
|
|
|
|
|
| • | Riveting Cap.=3/16 in (steel), Bore Diam=0.600 in, Stroke Length=3 in, Cycle Rate=2000 blows/min [Max], Air Consumption=8 CFM, Length=6.800 in, Retainer Type=Be... |
|
$371.97
|
|
|
|
|
| • | Riveting Cap.=1/4 in (steel), Bore Diam=0.060 in, Stroke Length=4 in, Cycle Rate=1700 blows/min [Max], Air Consumption=8 CFM, Length=7.800 in, Retainer Type=Bee... |
|
$425.15
|
|
|
|
|
| • | Patented Shock Reduction Technology |
| • | Lightweight, compact and powerful design |
|
$102.89
|
|
|
|
|
| • | Patented Shock Reduction Technology |
| • | Longer barrel for a longer stroke and more power |
|
$119.04
|
|
|
|
|
| • | Securely holds .401" shank chisels. Fits most popular air hammers. Safe to use, fast to change chisels. Just pull back collar to install or remove chisels. ... |
|
$14.53
|
|
|